那些遇到过的问题

ReAgentc：无法更新 WinRE 启动配置数据

And*_*pez 1 windows windows-10-upgrade windows-10 windows-re

Windows 10 Pro x64 v1909 更新失败：
问题似乎是由 WinRE 问题引起的，如果我还尝试重置 PC，则会收到错误消息。

  • 我试过重置ReAgent.xml[failed] 并移动/恢复winre.wim到%WinDir%\system32\Recovery，然后运行reagentc /enabled[successful]，但是当我/info再次运行时，它显示为 disabled 并且winre.wim路径消失了。

ReAgentc /Info：

  •  Windows Recovery Environment (Windows RE) and system reset configuration Information:

 Windows RE status:         Disabled
 Windows RE location:
 Boot Configuration Data (BCD) identifier: 00000000-0000-0000-0000-000000000000
 Recovery image location:
 Recovery image index:      0
 Custom image location:
 Custom image index:        0
 ReAgentc: Operation Successful.
    Run Code Online (Sandbox Code Playgroud)

BCDedit /Enum all：

  •  Windows Boot Manager
 --------------------
 identifier              {bootmgr}
 device                  partition=\Device\HarddiskVolume1
 description             Windows Boot Manager
 default                 {current}
 resumeobject            {0dfb2af9-a292-11e9-ba4c-806e6f6e6963}
 displayorder            {current}
 timeout                 30

 Windows Boot Loader
 -------------------
 identifier              {current}
 device                  partition=C:
 path                    \Windows\system32\winload.exe
 description             Microsoft Windows 10 x64 Edition
 recoverysequence        {00000000-0000-0000-0000-000000000000}
 recoveryenabled         Yes
 osdevice                partition=C:
 systemroot              \Windows
 resumeobject            {0dfb2af9-a292-11e9-ba4c-806e6f6e6963}
 nocrashautoreboot       No
 lastknowngood           No

 Resume from Hibernate
 ---------------------
 identifier              {0dfb2af9-a292-11e9-ba4c-806e6f6e6963}
 device                  partition=C:
 path                    \Windows\system32\winresume.exe
 description             Microsoft Windows 10 x64 Edition
 inherit                 {resumeloadersettings}
 recoverysequence        {00000000-0000-0000-0000-000000000000}
 recoveryenabled         Yes
 filedevice              partition=C:
 filepath                \hiberfil.sys
 debugoptionenabled      No
    Run Code Online (Sandbox Code Playgroud)

ReAgentc /Enable 日志文件：

  •  10:37:08, Info        [ReAgentc] ------------------------------------------------------
 10:37:08, Info        [ReAgentc] -----Executing command line: reagentc  /?-----
 10:37:08, Info        [ReAgentc] ------------------------------------------------------

 10:37:08, Info        [ReAgentc] ------------------------------------------------------
 10:37:08, Info        [ReAgentc] -----Exiting command line: reagentc  /?, Error: 0-----
 10:37:08, Info        [ReAgentc] ------------------------------------------------------

 10:37:26, Info        [ReAgentc] ------------------------------------------------------
 10:37:26, Info        [ReAgentc] -----Executing command line: reagentc  /v-----
 10:37:26, Info        [ReAgentc] ------------------------------------------------------

 10:37:26, Info        [ReAgentc] ------------------------------------------------------
 10:37:26, Info        [ReAgentc] -----Exiting command line: reagentc  /v, Error: 87-----
 10:37:26, Info        [ReAgentc] ------------------------------------------------------

 10:40:00, Info        [ReAgentc] ------------------------------------------------------
 10:40:00, Info        [ReAgentc] -----Executing command line: reagentc  /info-----
 10:40:00, Info        [ReAgentc] ------------------------------------------------------
 10:40:00, Info        [ReAgentc] Enter WinReGetConfig
 10:40:00, Info        [ReAgentc] Parameters: configWinDir: NULL
 10:40:00, Info        [ReAgentc] WinRE config file path: C:\Windows\system32\Recovery\ReAgent.xml
 10:40:00, Info        [ReAgentc] Update enhanced config info is enabled.
 10:40:00, Error       [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034
 10:40:00, Info        [ReAgentc] winreGetWinReGuid returning 0X2
 10:40:00, Info        [ReAgentc] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo WinRE disabled, WinRE Guid could not be determined  (0x2) 
 10:40:00, Info        [ReAgentc] WinRE is staged
 10:40:00, Info        [ReAgentc] System is WimBoot: FALSE
 10:40:00, Info        [ReAgentc] Exit WinReGetConfig return value: 1, last error: 0x0

 10:40:00, Info        [ReAgentc] ------------------------------------------------------
 10:40:00, Info        [ReAgentc] -----Exiting command line: reagentc  /info, Error: 0-----
 10:40:00, Info        [ReAgentc] ------------------------------------------------------

 10:40:05, Info        [ReAgentc] ------------------------------------------------------
 10:40:05, Info        [ReAgentc] -----Executing command line: reagentc  /enable-----
 10:40:05, Info        [ReAgentc] ------------------------------------------------------
 10:40:05, Info        [ReAgentc] Enter WinRECheckGuid
 10:40:05, Info        [ReAgentc] Parameter: TargetOsGuid: : NULL 
 10:40:05, Info        [ReAgentc] Exit WinRECheckGuid return error code: 0x0
 10:40:05, Info        [ReAgentc] Enter WinReInstall
 10:40:05, Info        [ReAgentc] Parameter: ReInstallBecauseOfBitlocker: 0

 10:40:05, Info        [ReAgentc] --Install on target OS step 1: collect info like partition list, loading reagent.xml, source winre.wim and partition
 10:40:05, Info        [ReAgentc] Enumerate and log all fixed partitions:

 10:40:05, Info        [ReAgentc] --Partition info--
 10:40:05, Info        [ReAgentc] VolumeName: \\?\Volume{55abc128-0000-0000-0000-602200000000}, PartitionName: \\?\GLOBALROOT\device\harddisk0\partition2
 10:40:05, Info        [ReAgentc] Partition number: 2, offset: 576716800, free space: 299773304832, total space: 511531372544
 10:40:05, Info        [ReAgentc] DiskNumber:0, DiskSignature:1437319464, NTFS:1, Mbr:1, Active:0, Boot:1, BitlockerEnabled:0
 10:40:05, Info        [ReAgentc] MBR partition id: 0x7
 10:40:05, Info        [ReAgentc] DiskId: {00000000-0000-0000-0000-000000000000} 
 10:40:05, Info        [ReAgentc] --Partition info--
 10:40:05, Info        [ReAgentc] VolumeName: \\?\Volume{55abc128-0000-0000-0000-100000000000}, PartitionName: \\?\GLOBALROOT\device\harddisk0\partition1
 10:40:05, Info        [ReAgentc] Partition number: 1, offset: 1048576, free space: 541589504, total space: 575664128
 10:40:05, Info        [ReAgentc] DiskNumber:0, DiskSignature:1437319464, NTFS:1, Mbr:1, Active:1, Boot:0, BitlockerEnabled:0
 10:40:05, Info        [ReAgentc] MBR partition id: 0x7
 10:40:05, Info        [ReAgentc] DiskId: {00000000-0000-0000-0000-000000000000} 
 10:40:05, Info        [ReAgentc] Get downlevel ReAgent config
 10:40:05, Info        [ReAgentc]  Downlevel config file path: \Recovery\ReAgentOld.xml
 10:40:05, Info        [ReAgentc]  Checking for downlevel WinRE installation.
 10:40:05, Info        [ReAgentc] First round search
 10:40:05, Info        [ReAgentc] Get ReAgent config
 10:40:05, Info        [ReAgentc] GetReAgentConfig Config file path: C:\Windows\system32\Recovery\ReAgent.xml
 10:40:05, Info        [ReAgentc] CheckRegKey test hook (SystemSetupInProgress) present and disabled
 10:40:05, Info        [ReAgentc] Update enhanced config info is enabled.
 10:40:05, Error       [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034
 10:40:05, Info        [ReAgentc] winreGetWinReGuid returning 0X2
 10:40:05, Info        [ReAgentc] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo WinRE disabled, WinRE Guid could not be determined  (0x2) 
 10:40:05, Info        [ReAgentc] --Install on target OS step 2: detect and fix if there is any issue for winre settings
 10:40:05, Info        [ReAgentc] DetectAndFixWinReIssues (WinRE)WinRE is already installed, setting BCD entry (winre location \\?\GLOBALROOT\device\harddisk0\partition2\Recovery\WindowsRE)
 10:40:05, Error       [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034
 10:40:05, Info        [ReAgentc] winreGetWinReGuid returning 0X2
 10:40:05, Info        [ReAgentc] DetectAndFixWinReIssues Failed to get WinRE GUID.
 10:40:05, Info        [ReAgentc] DetectAndFixWinReIssues Will fix the BCD entry.
 10:40:05, Error       [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034
 10:40:05, Info        [ReAgentc] winreGetWinReGuid returning 0X2
 10:40:05, Info        [ReAgentc] NOTE: WILL RETRY. We have to uninstall WinRE and retry because WinRE is installed but its BCD entry is not present.
 10:40:05, Info        [ReAgentc] DetectAndFixWinReIssues Copying Winre.wim from \\?\GLOBALROOT\device\harddisk0\partition2\Recovery\WindowsRE to staging location
 10:40:05, Info        [ReAgentc] winreCopyWIMBack moved WIM file from \\?\GLOBALROOT\device\harddisk0\partition2\Recovery\WindowsRE\ to C:\Windows\system32\Recovery\Winre.wim successfully!
 10:40:05, Info        [ReAgentc] DetectAndFixWinReIssues we should retry because winre installation was changed.
 10:40:05, Error       [ReAgentc] failed to detect and fix winre issues, error:0x2
 10:40:05, Info        [ReAgentc] Exit WinReInstall return value: 0, last error: 0x2
 10:40:05, Error       [ReAgentc] failed to install winre: : 0x2

 10:40:05, Info        [ReAgentc] ------------------------------------------------------
 10:40:05, Info        [ReAgentc] -----Exiting command line: reagentc  /enable, Error: 2-----
 10:40:05, Info        [ReAgentc] ------------------------------------------------------

 10:40:08, Info        [ReAgentc] ------------------------------------------------------
 10:40:08, Info        [ReAgentc] -----Executing command line: reagentc  /enable-----
 10:40:08, Info        [ReAgentc] ------------------------------------------------------
 10:40:08, Info        [ReAgentc] Enter WinRECheckGuid
 10:40:08, Info        [ReAgentc] Parameter: TargetOsGuid: : NULL
 10:40:08, Info        [ReAgentc] Exit WinRECheckGuid return error code: 0x0
 10:40:08, Info        [ReAgentc] Enter WinReInstall
 10:40:08, Info        [ReAgentc] Parameter: ReInstallBecauseOfBitlocker: 0

 10:40:08, Info        [ReAgentc] --Install on target OS step 1: collect info like partition list, loading reagent.xml, source winre.wim and partition
 10:40:08, Info        [ReAgentc] Enumerate and log all fixed partitions:

 10:40:08, Info        [ReAgentc] --Partition info--
 10:40:08, Info        [ReAgentc] VolumeName: \\?\Volume{55abc128-0000-0000-0000-602200000000}, PartitionName: \\?\GLOBALROOT\device\harddisk0\partition2
 10:40:08, Info        [ReAgentc] Partition number: 2, offset: 576716800, free space: 300220190720, total space: 511531372544
 10:40:08, Info        [ReAgentc] DiskNumber:0, DiskSignature:1437319464, NTFS:1, Mbr:1, Active:0, Boot:1, BitlockerEnabled:0
 10:40:08, Info        [ReAgentc] MBR partition id: 0x7
 10:40:08, Info        [ReAgentc] DiskId: {00000000-0000-0000-0000-000000000000}

 10:40:08, Info        [ReAgentc] --Partition info--
 10:40:08, Info        [ReAgentc] VolumeName: \\?\Volume{55abc128-0000-0000-0000-100000000000}, PartitionName: \\?\GLOBALROOT\device\harddisk0\partition1
 10:40:08, Info        [ReAgentc] Partition number: 1, offset: 1048576, free space: 541589504, total space: 575664128
 10:40:08, Info        [ReAgentc] DiskNumber:0, DiskSignature:1437319464, NTFS:1, Mbr:1, Active:1, Boot:0, BitlockerEnabled:0
 10:40:08, Info        [ReAgentc] MBR partition id: 0x7
 10:40:08, Info        [ReAgentc] DiskId: {00000000-0000-0000-0000-000000000000} 
 10:40:08, Info        [ReAgentc] Get downlevel ReAgent config
 10:40:08, Info        [ReAgentc]  Downlevel config file path: \Recovery\ReAgentOld.xml
 10:40:08, Info        [ReAgentc]  Checking for downlevel WinRE installation.
 10:40:08, Info        [ReAgentc] First round search
 10:40:08, Info        [ReAgentc] Get ReAgent config
 10:40:08, Info        [ReAgentc] GetReAgentConfig Config file path: C:\Windows\system32\Recovery\ReAgent.xml
 10:40:08, Info        [ReAgentc] CheckRegKey test hook (SystemSetupInProgress) present and disabled
 10:40:08, Info        [ReAgentc] Update enhanced config info is enabled.
 10:40:08, Error       [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034
 10:40:08, Info        [ReAgentc] winreGetWinReGuid returning 0X2
 10:40:08, Info        [ReAgentc] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo WinRE disabled, WinRE Guid could not be determined  (0x2)
 10:40:08, Info        [ReAgentc] FindWinReSourceImageAndPartition No source winre.wim was specified.  Checking for a staged winre.wim.
 10:40:08, Info        [ReAgentc] FindWinReSourceImageAndPartition using winre.wim from C:\Windows\system32\Recovery

 10:40:08, Info        [ReAgentc] --Install on target OS step 2: detect and fix if there is any issue for winre settings
 10:40:08, Info        [ReAgentc] DetectAndFixWinReIssues nothing to do because winre is not enabled.

 10:40:08, Info        [ReAgentc] --Install on target OS step 3: check if we can keep winre.wim in the same partition if it is staged.

 10:40:08, Info        [ReAgentc] --Install on target OS step 4: check if we can put winre.wim in other partitions or create one if needed.

 10:40:08, Info        [ReAgentc] CanPutWinREOnOtherPartitions WinRE is not staged. Searching for a suitable partition for WinRE.
 10:40:08, Info        [ReAgentc] Entering FindTargetPartition
 10:40:08, Info        [ReAgentc] RegLoadKey $OFFLINE$SYSTEM failed. Error: 0x522.
 10:40:08, Info        [ReAgentc]  Not allowed to repartition the disk
 10:40:08, Info        [ReAgentc] Start looping through each partition and initialize os partition, recovery partition and system partition for MBR
 10:40:08, Info        [ReAgentc]  Checking partition at offset 576716800, partition number: 2
 10:40:08, Info        [ReAgentc]  find OS partition
 10:40:08, Info        [ReAgentc]  Checking partition at offset 1048576, partition number: 1
 10:40:08, Info        [ReAgentc]  NOTE: find system partition and not OS partition for MBR
 10:40:08, Info        [ReAgentc] Complete looping through each partition

 10:40:08, Info        [ReAgentc] ----Search target partition option #1: try existing WinRE partition

 10:40:08, Info        [ReAgentc] ----Search target partition option #2: try first recovery partition

 10:40:08, Info        [ReAgentc] ----Search target partition option #3: try system partition for MBR

 10:40:08, Info        [ReAgentc] MeetPartitionRequirements Partition details: {Offset: 1048576, Free space: 541589504, Total space: 575664128}
 10:40:08, Info        [ReAgentc] MeetPartitionRequirements WinRE WIM size: 443717121
 10:40:08, Info        [ReAgentc] MeetPartitionRequirements Required free space: 831690241
 10:40:08, Warning     [ReAgentc] MeetPartitionRequirements Not enough free space req = 831690241 avail = 541589504 offset = 1048576

 10:40:08, Info        [ReAgentc] ----Search target partition option #4: try new recovery partition if allowed

 10:40:08, Info        [ReAgentc] ----Search target partition option #5: try target OS partition

 10:40:08, Info        [ReAgentc] MeetPartitionRequirements Partition details: {Offset: 576716800, Free space: 300220190720, Total space: 511531372544}
 10:40:08, Info        [ReAgentc] MeetPartitionRequirements WinRE WIM size: 443717121
 10:40:08, Info        [ReAgentc] MeetPartitionRequirements Required free space: 52428800
 10:40:08, Info        [ReAgentc] Found target partition: use target OS partition, offset: 576716800
 10:40:08, Info        [ReAgentc] Exit FindTargetPartition returns with status code: 0x0

 10:40:08, Info        [ReAgentc] --Install on target OS step 5: set WinRE settings and restore system to a good state when hitting any errors
 10:40:08, Info        [ReAgentc] Enter SetWinRESettings
 10:40:08, Info        [ReAgentc] RegLoadKey $OFFLINE$SYSTEM failed. Error: 0x522.
 10:40:08, Info        [ReAgentc] Copying WinRE from C:\Windows\system32\Recovery to staging location on \\?\GLOBALROOT\device\harddisk0\partition2
 10:40:08, Info        [ReAgentc] RegLoadKey $OFFLINE$SYSTEM failed. Error: 0x522.
 10:40:08, Info        [ReAgentc] Copied WinRE to staging location
 10:40:08, Info        [ReAgentc] Creating BCD entry
 10:40:08, Error       [ReAgentc] BcdGetElementData failed: 0xc0000225
 10:40:08, Info        [ReAgentc] WinRE created BCD entry: : {00000000-0000-0000-0000-000000000000} 
 10:40:08, Info        [ReAgentc] Moving Winre and boot.sdi from staging location to target
 10:40:08, Info        [ReAgentc] Moved Winre and boot.sdi from staging location to target
 10:40:08, Info        [ReAgentc] Updating reagent.xml
 10:40:08, Info        [ReAgentc] Set WinRE location path to: \Recovery\WindowsRE
 10:40:08, Info        [ReAgentc] Set recovery guid
 10:40:08, Info        [ReAgentc] Set scheduled operation: WinReNoOperation
 10:40:08, Info        [ReAgentc] Set OS build version: 17763.1.amd64fre.rs5_release.180914-1434
 10:40:08, Info        [ReAgentc] Set Wimboot state: 0
 10:40:08, Info        [ReAgentc] Set install state to: enabled
 10:40:08, Info        [ReAgentc] Setting the recovery sequence for the target OS.
 10:40:08, Info        [ReAgentc] Machine firmware is not EFI, nothing to do
 10:40:08, Info        [ReAgentc] Creating backup of reagent.xml
 10:40:08, Info        [ReAgentc] Created backup of reagent.xml
 10:40:08, Info        [ReAgentc] Configuring the WinRE validation task.
 10:40:08, Info        [ReAgentc] Failed to clear WIM file trusted state: 0x2
 10:40:08, Info        [ReAgentc] Failed to clear WIM file hash: 0x2
 10:40:08, Info        [ReAgentc] Update enhanced config info is enabled.
 10:40:08, Error       [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034
 10:40:08, Info        [ReAgentc] winreGetWinReGuid returning 0X2
 10:40:08, Info        [ReAgentc] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo WinRE disabled, WinRE Guid could not be determined  (0x2) 
 10:40:08, Info        [ReAgentc] Failed to find winre.wim because WinRE is not installed.
 10:40:08, Info        [ReAgentc] WinReValidateRecoveryWimInternal took 16 ms.
 10:40:08, Warning     [ReAgentc] WinReValidateRecoveryWimInternal failed: 0x490
 10:40:08, Warning     [ReAgentc] winreConfigureValidationTask failed: 0x490, a non critical error
 10:40:08, Info        [ReAgentc] Completed the WinRE validation task.
 10:40:08, Info        [ReAgentc] Creating backup of customization file
 10:40:08, Warning     [ReAgentc] Recovery file not found at C:\Windows\system32\Recovery\ReCustomization.xml
 10:40:08, Warning     [ReAgentc] winreBackupRecoveryFile (C:\Windows\system32\Recovery\ReCustomization.xml, ReCustomization.xml) failed, Err: 2
 10:40:08, Info        [ReAgentc] Created backup of customization file
 10:40:08, Info        [ReAgentc] SetWinRESettings return with error code 0x0
 10:40:08, Info        [ReAgentc] WinReInstallOnTargetOSInternal WinRE installation completed successfully.
 10:40:08, Info        [ReAgentc] Exit WinReInstall return value: 1, last error: 0x0
 10:40:08, Info        [ReAgentc] Enter WinReSetConfig
 10:40:08, Info        [ReAgentc] Parameters: configWinDir: NULL
 10:40:08, Info        [ReAgentc] Update enhanced config info is enabled.
 10:40:08, Error       [ReAgentc] BcdOpenObject(WinRE) failed: 0xc0000034
 10:40:08, Info        [ReAgentc] winreGetWinReGuid returning 0X2
 10:40:08, Info        [ReAgentc] ReAgentConfig::ReadBcdAndUpdateEnhancedConfigInfo WinRE disabled, WinRE Guid could not be determined  (0x2) 
 10:40:08, Info        [ReAgentc] WinRE is not installed, nothing to back up
 10:40:08, Info        [ReAgentc] Exit WinReSetConfig return value: 1, last error: 0x0
 10:40:08, Info        [ReAgentc] Clear non critical error when enabling auto repair

 10:40:08, Info        [ReAgentc] ------------------------------------------------------
 10:40:08, Info        [ReAgentc] -----Exiting command line: reagentc  /enable, Error: 0-----
 10:40:08, Info

JW0*_*914 7

\n

\n

WinRE 不应存储在系统分区或启动分区 [BIOS] 上，因为如果任一分区出现问题，它会阻止启动恢复

\n
\n

默认winre.wim位置不是 %WinDir%\\system32\\Recovery：

\n
    \n
  • BIOS： （WinRE 应该位于它自己的分区上 -只有Windows 10 全新安装才会这样做） \n
      \n
    • Windows \xe2\x89\xa510：（ \\\\WinRE_partition\\Recovery\\WindowsRE
      升级C:\\Recovery\\WindowsRE：）
      • \n
    • Windows \xe2\x89\xa48.1： C:\\Recovery\\WindowsRE
      • \n
    \n
    • \n
  • UEFI： \\\\WinRE_partition\\Recovery\\WindowsRE

    • \n
\n

要解决，#2 或 #3：( ReAgentc)

\n
    \n
  1. 打开管理终端： WinKey+R \xe2\x86\x92打开：powershell\xe2\x86\x92 CTRL+SHIFT + OK
    2. \n
  2. 确保winre.wim位于C:\\Recovery\\WindowsRE并设置正确的路径： \n
    ReAgentc /Disable ; ReAgentC /SetREimage /Path "C:\\Recovery\\WindowsRE" ; ReAgentc /Enable ; ReAgentc /Info\n
    Run Code Online (Sandbox Code Playgroud)\n
    -- 或 --

    3. \n
  3. 将 WinRE 移至其自己的分区: \n
      \n
    1. 备份当前winre.wim： \n
        \n
      1. 验证是否C:\\Windows\\System32\\Recovery\\WinRE.wim存在:\n
        Ls "C:\\Windows\\System32\\Recovery" | FindStr /I "WinRE.wim" ; ls "C:\\Windows\\System32\\Recovery" -Hidden | FindStr /I "WinRE.wim"\n
        Run Code Online (Sandbox Code Playgroud)\n
        2. \n
      2. 如果没有：\n
        Xcopy /H "C:\\Recovery\\WindowsRE\\WinRE.wim" "C:\\Windows\\System32\\Recovery"\n
        Run Code Online (Sandbox Code Playgroud)\n
          \n
        • BIOS：可以将 WinRE 存储在启动分区上：在\xe2\x86\x92处安装启动更新 WIM 路径Y:

          • \n
        \n
        3. \n
      \n
      2. \n
    2. 创建 650MB WinRE 分区： WinKey+R \xe2\x86\x92打开：DiskPart\xe2\x86\x92 确定\n
      ::# WinRE partition should have ~300MB free for future winre.wim size increases\n\n::# Select OS partition: \nsel vol c\n\n::# Shrink partition by 665MB [RAW]:\nshrink desired=665 minimum=650\n\n::# Create WinRE partition:\n\n  ::# BIOS:\n  cre par pri size=665 id=27\n\n  ::# UEFI:\n  cre par pri size=665 id=de94bba4-06d1-4d40-a16a-bfd50179d6ac\n  gpt attributes=0x8000000000000001\n\n::# Format partition:\nformat fs=ntfs quick label=WinRE\n\n::# Mount partition:\nassign letter=z\n\nexit\n
      Run Code Online (Sandbox Code Playgroud)\n
      \n
      3. \n
    3. 禁用 WinRE，设置 的自定义位置winre.wim，然后重新启用 WinRE: \n
      # Copy WinRE.wim:\n  MkDir "Z:\\Recovery\\WindowsRE" ; Xcopy /H "C:\\Recovery\\WindowsRE\\WinRE.wim" "Z:\\Recovery\\WindowsRE"\n\n# Disable WinRE:\n  ReAgentC /Disable\n\n# Set Custom WinRE Path:\n  ReAgentC /SetREimage /Path "Z:\\Recovery\\WindowsRE"\n\n# Enable WinRE:\n  ReAgentC /Enable\n\n# Verify:\n  ReAgentC /Info\n\n# Remove WinRE mount point:\n  DiskPart\n    sel vol z\n    remove\n    exit\n
      Run Code Online (Sandbox Code Playgroud)\n
      \n
      4. \n
    \n
    4. \n
\n
\n

为了解决导致否决票的事实上不准确的误解：

\n
    \n
  • 这个答案，也不是OP的问题，与BCD存储有任何关系：
    OP的问题是默认winre.wim位置不是%WinDir%\\system32\\Recovery

    • \n
\n

小智 5

解决方案是/OSguid将 Windows 引导加载程序与 Windows 引导管理器一起使用，而不是 Windows 恢复环境或 Windows 恢复应用程序：

ReAgentc /Enable /OSguid {GUID}
Run Code Online (Sandbox Code Playgroud)

归档时间：

查看次数：

8077 次

最近记录：

4 年，6 月 前
相关归档
是否有一个什么都不做的Windows exe？ 52
将“以管理员身份在此处打开 Powershell”选项添加到文件夹上下文菜单 16
关闭盖子时防止屏幕关闭 15
如何从命令提示符中的任何目录运行 explorer.exe？ 15
是否有类似 Windows7 的 gnome-keyring 之类的东西？ 9
使用命令行工具提高 MP3 的速度 6
Mac 和 Windows 之间最快的屏幕共享？ 5
删除 Filemon / Process Monitor 中接近重复的行以更轻松地分析操作系统操作 5
有没有办法在多个 Windows 服务器上并行运行命令 2
Wingdings 或 Webdings 会搞砸我的电脑吗？ -3
难疑归档
在 bash 中，我如何逃避感叹号？ 217
我不小心在 bash 命令行中输入了密码 198
如何移动 VirtualBox 文件？ 179
Google Chrome - 清除特定网站的缓存 150
Linux - 如何递归修改文件夹？ 125
我应该如何选择我的 DNS？ 113
如何摆脱 Office 2013 中的所有大写功能区标题？ 113
单元格不自动更新 101
如何使用 VLC 媒体播放器重新同步字幕和视频？ 100
如何将 Notepad++ 设置为默认编辑器？ 99