小编ele*_*ggy的帖子

我想使用最新的HAL库而不是标准外设库.

我想读出BMA250E G传感器的chip_id,但它不起作用.

aRxBuffer的值始终保持为0x00.但它应该是0xf9!

我的代码有什么问题？

?#?include? "stm32f4xx_hal.h" 

#define I2Cx_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define I2Cx_SDA_PIN GPIO_PIN_9
#define I2Cx_SDA_GPIO_PORT GPIOB
#define I2Cx_SDA_AF GPIO_AF4_I2C1

#define I2Cx_SCL_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define I2Cx_SCL_PIN GPIO_PIN_6
#define I2Cx_SCL_GPIO_PORT GPIOB
#define I2Cx_SCL_AF GPIO_AF4_I2C1

#define I2Cx_CLK_ENABLE() __HAL_RCC_I2C1_CLK_ENABLE()
#define I2Cx_FORCE_RESET() __HAL_RCC_I2C1_FORCE_RESET()
#define I2Cx_RELEASE_RESET() __HAL_RCC_I2C1_RELEASE_RESET() 

Run Code Online (Sandbox Code Playgroud)

?#?define? I2C_ADDRESS 0x18 

static void SystemClock_Config(void); 

uint8_t aTxBuffer[2],aRxBuffer; 

int main()
{ 
    HAL_Init(); 
    SystemClock_Config(); 
    I2C_HandleTypeDef I2cHandle;

    I2cHandle.Instance = I2C1;
    I2cHandle.Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
    I2cHandle.Init.ClockSpeed = 400000;
    I2cHandle.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE; 
    I2cHandle.Init.DutyCycle = I2C_DUTYCYCLE_16_9;
    I2cHandle.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE; 
    I2cHandle.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
    I2cHandle.Init.OwnAddress1 = 0; 
    I2cHandle.Init.OwnAddress2 …