如何在Delphi记录中模拟位域？

Question

我想在Delphi中声明一个包含与C中相同布局的记录.

对于那些感兴趣的人:此记录是Windows操作系统的LDT_ENTRY记录中的联合的一部分.(我需要在Delphi中使用此记录,因为我正在使用Delphi中的Xbox模拟器 - 请参阅sourceforge上的项目Dxbx).

无论如何,有问题的记录定义为:

    struct
    {
        DWORD   BaseMid : 8;
        DWORD   Type : 5;
        DWORD   Dpl : 2;
        DWORD   Pres : 1;
        DWORD   LimitHi : 4;
        DWORD   Sys : 1;
        DWORD   Reserved_0 : 1;
        DWORD   Default_Big : 1;
        DWORD   Granularity : 1;
        DWORD   BaseHi : 8;
    }
    Bits;

据我所知,Delphi中没有可用的位域.我试过这个:

 Bits = record
      BaseMid: Byte; // 8 bits
      _Type: 0..31; // 5 bits
      Dpl: 0..3; // 2 bits
      Pres: Boolean; // 1 bit
      LimitHi: 0..15; // 4 bits
      Sys: Boolean; // 1 bit
      Reserved_0: Boolean; // 1 bit
      Default_Big: Boolean; // 1 bit
      Granularity: Boolean; // 1 bit
      BaseHi: Byte; // 8 bits
  end;

但是唉:它的大小变成了10个字节,而不是预期的4.我想知道如何声明记录,这样我就可以得到一个具有相同布局,相同大小和相同成员的记录.优选没有吸气剂/固定剂的负荷.

TIA.

Answer 1

感谢大家!

根据这些信息,我将其减少为:

RBits = record
public
  BaseMid: BYTE;
private
  Flags: WORD;
  function GetBits(const aIndex: Integer): Integer;
  procedure SetBits(const aIndex: Integer; const aValue: Integer);
public
  BaseHi: BYTE;
  property _Type: Integer index $0005 read GetBits write SetBits; // 5 bits at offset 0
  property Dpl: Integer index $0502 read GetBits write SetBits; // 2 bits at offset 5
  property Pres: Integer index $0701 read GetBits write SetBits; // 1 bit at offset 7
  property LimitHi: Integer index $0804 read GetBits write SetBits; // 4 bits at offset 8
  property Sys: Integer index $0C01 read GetBits write SetBits; // 1 bit at offset 12
  property Reserved_0: Integer index $0D01 read GetBits write SetBits; // 1 bit at offset 13
  property Default_Big: Integer index $0E01 read GetBits write SetBits; // 1 bit at offset 14
  property Granularity: Integer index $0F01 read GetBits write SetBits; // 1 bit at offset 15
end;

索引编码如下:(BitOffset shl 8) + NrBits.其中1 <= NrBits <= 32且0 <= BitOffset <= 31

现在,我可以按如下方式设置和设置这些位:

{$OPTIMIZATION ON}
{$OVERFLOWCHECKS OFF}
function RBits.GetBits(const aIndex: Integer): Integer;
var
  Offset: Integer;
  NrBits: Integer;
  Mask: Integer;
begin
  NrBits := aIndex and $FF;
  Offset := aIndex shr 8;

  Mask := ((1 shl NrBits) - 1);

  Result := (Flags shr Offset) and Mask;
end;

procedure RBits.SetBits(const aIndex: Integer; const aValue: Integer);
var
  Offset: Integer;
  NrBits: Integer;
  Mask: Integer;
begin
  NrBits := aIndex and $FF;
  Offset := aIndex shr 8;

  Mask := ((1 shl NrBits) - 1);
  Assert(aValue <= Mask);

  Flags := (Flags and (not (Mask shl Offset))) or (aValue shl Offset);
end;

很漂亮,你不觉得吗？!？!

PS:Rudy Velthuis现在包括了他在出色的"转换陷阱"中的修订版本.

Answer 2

Rudy的Delphi Corner是我所知道的有关Delphi和C/C++互操作性的最佳资源.在Delphi中使用C/C++ API时,他的转换陷阱几乎是必读的.你最感兴趣的章节是记录和对齐 - > Bitfields,但我恳请你从上到下阅读整个内容,两次.其他文章也绝对值得花时间投资.

Answer 3

好吧,我的位操作有点生疏,所以我可以颠倒字节.但是下面的代码给出了一般的想法:

type
  TBits = record
  private
    FBaseMid     : Byte;
    FTypeDplPres :  Byte;
    FLimitHiSysEa: Byte;
    FBaseHi      : Byte;

    function GetType: Byte;
    procedure SetType(const AType: Byte);
    function GetDpl: Byte;
    procedure SetDbl(const ADpl: Byte);
    function GetBit1(const AIndex: Integer): Boolean;
    procedure SetBit1(const AIndex: Integer; const AValue: Boolean);
    function GetLimitHi: Byte;
    procedure SetLimitHi(const AValue: Byte);
    function GetBit2(const AIndex: Integer): Boolean;
    procedure SetBit2(const AIndex: Integer; const AValue: Boolean);

  public
    property BaseMid: Byte read FBaseMid write FBaseMid;
    property &Type: Byte read GetType write SetType; // 0..31
    property Dpl: Byte read GetDpl write SetDbl; // 0..3
    property Pres: Boolean index 128 read GetBit1 write SetBit1; 
    property LimitHi: Byte read GetLimitHi write SetLimitHi; // 0..15

    property Sys: Boolean index 16 read GetBit2 write SetBit2; 
    property Reserved0: Boolean index 32 read GetBit2 write SetBit2; 
    property DefaultBig: Boolean index 64 read GetBit2 write SetBit2; 
    property Granularity: Boolean index 128 read GetBit2 write SetBit2; 
    property BaseHi: Byte read FBaseHi write FBaseHi;
  end;

  function TBits.GetType: Byte;
  begin
    Result := (FTypeDplPres shr 3) and $1F;
  end;

  procedure TBits.SetType(const AType: Byte);
  begin
    FTypeDplPres := (FTypeDplPres and $07) + ((AType and $1F) shr 3);
  end;

  function TBits.GetDpl: Byte;
  begin
    Result := (FTypeDplPres and $06) shr 1;
  end;

  procedure TBits.SetDbl(const ADpl: Byte);
  begin
    FTypeDblPres := (FTypeDblPres and $F9) + ((ADpl and $3) shl 1);
  end;

  function TBits.GetBit1(const AIndex: Integer): Boolean;
  begin
    Result := FTypeDplPres and AIndex = AIndex;
  end;

  procedure TBits.SetBit1(const AIndex: Integer; const AValue: Boolean);
  begin
    if AValue then
      FTypeDblPres := FTypeDblPres or AIndex
    else
      FTypeDblPres := FTypeDblPres and not AIndex;
  end;

  function TBits.GetLimitHi: Byte;
  begin
    Result := (FLimitHiSysEa shr 4) and $0F;
  end;

  procedure TBits.SetLimitHi(const AValue: Byte);
  begin
    FLimitHiSysEa := (FLimitHiSysEa and $0F) + ((AValue and $0F) shr 4);
  end;

  function TBits.GetBit2(const AIndex: Integer): Boolean;
  begin
    Result := FLimitHiSysEa and AIndex = AIndex;
  end;

  procedure TBits.SetBit2(const AIndex: Integer; const AValue: Boolean);
  begin
    if AValue then
      FLimitHiSysEa := FLimitHiSysEa or AIndex
    else
      FLimitHiSysEa := FLimitHiSysEa and not AIndex;
  end;