Ubuntu 13.04 无法识别 U 盘

Question

使用 Ubuntu 13.04（使用 Gnome 3），我的新 U 盘（详细信息参见 dmesg/lsusb）不会自动显示。情况：

• 驱动器不显示在 fdisk -l
• 运行时确实出现驱动 lsusb
• 驱动器被 Windows 8 机器正确识别

等待几分钟后，观看 reset high-speed USB device number 4 using ehci-pci我的 dmesg 中消息后，我决定拔出我的棒，这导致磁盘读取失败。

消息

Aug 27 19:44:48 nbuntu kernel: [  257.189068] sd 9:0:0:0: [sdc] Attached 
SCSI removable disk
Aug 27 19:44:55 nbuntu kernel: [  264.349591] usb 3-2: new high-speed USB device number 4 using ehci-pci
Aug 27 19:44:55 nbuntu kernel: [  264.797502] usb 3-2: New USB device found, idVendor=0951, idProduct=162b
Aug 27 19:44:55 nbuntu kernel: [  264.797505] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug 27 19:44:55 nbuntu kernel: [  264.797507] usb 3-2: Product: DT HyperX 3.0
Aug 27 19:44:55 nbuntu kernel: [  264.797508] usb 3-2: Manufacturer: Kingston
Aug 27 19:44:55 nbuntu kernel: [  264.797510] usb 3-2: SerialNumber: 20CF30E118F8BD6180000356
Aug 27 19:44:55 nbuntu kernel: [  264.797883] scsi10 : usb-storage 3-2:1.0
Aug 27 19:44:56 nbuntu kernel: [  265.794211] scsi 10:0:0:0: Direct-Access     Kingston DT HyperX 3.0    PMAP PQ: 0 ANSI: 6
Aug 27 19:44:56 nbuntu kernel: [  265.794905] sd 10:0:0:0: Attached scsi generic sg3 type 0
Aug 27 19:44:56 nbuntu kernel: [  265.795986] sd 10:0:0:0: [sdc] 123469824 512-byte logical blocks: (63.2 GB/58.8 GiB)
Aug 27 19:44:56 nbuntu kernel: [  265.796576] sd 10:0:0:0: [sdc] Write Protect is off
Aug 27 19:44:56 nbuntu kernel: [  265.796580] sd 10:0:0:0: [sdc] Mode Sense: 45 00 00 00
Aug 27 19:44:56 nbuntu kernel: [  265.797200] sd 10:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Aug 27 19:45:27 nbuntu kernel: [  296.403451] usb 3-2: reset high-speed USB device number 4 using ehci-pci
Aug 27 19:45:58 nbuntu kernel: [  327.264520] usb 3-2: reset high-speed USB device number 4 using ehci-pci
Aug 27 19:46:29 nbuntu kernel: [  358.221324] usb 3-2: reset high-speed USB device number 4 using ehci-pci
Aug 27 19:47:00 nbuntu kernel: [  389.178831] usb 3-2: reset high-speed USB device number 4 using ehci-pci
Aug 27 19:47:31 nbuntu kernel: [  420.087249] usb 3-2: reset high-speed USB device number 4 using ehci-pci
Aug 27 19:47:50 nbuntu kernel: [  438.752891] usb 3-2: USB disconnect, device number 4
Aug 27 19:47:50 nbuntu kernel: [  438.766483] ldm_validate_partition_table(): Disk read failed.
Aug 27 19:47:50 nbuntu kernel: [  438.766494] Dev sdc: unable to read RDB block 0
Aug 27 19:47:50 nbuntu kernel: [  438.766507]  sdc: unable to read partition table

lsusb

Bus 003 Device 004: ID 0951:162b Kingston Technology 
Bus 004 Device 002: ID 046d:c526 Logitech, Inc. Nano Receiver
Bus 005 Device 002: ID 046d:c318 Logitech, Inc. Illuminated Keyboard
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

卖家主页上的某人还表示，他不能在 Linux、Android、电视和蓝光播放器上使用该棒。有人可以给我一个提示可能是什么问题吗？

Answer 1

当我最近在 Windows 7 机器上使用该棒时，它要求我修复驱动器（我没有“安全”地删除它）。我勾选了两个框并继续。修复后，我的所有设备现在都能正确识别棍子。