流浪者配置eth0

Question

我最近开始使用 Vagrant 来快速安装虚拟机。我注意到我的网络配置并不完美，但我无法正确设置。

这是我的流浪文件：

ENV['VAGRANT_DEFAULT_PROVIDER'] = 'libvirt'

Vagrant.configure("2") do |config|

  config.vm.box = "debian/jessie64"
  config.vm.synced_folder ".", "/vagrant", id: "vagrant-root", disabled: true
  config.vm.provider "libvirt" do |lv|
        lv.driver = "kvm"
  end #config.vm.provider
  #how many hosts to deploy?
  n = 1
  (10..n+9).each do |i|
        config.vm.define "#{i}" do |vs|
                vs.vm.hostname = "vs-#{i}"
                vs.vm.network "private_network", ip: "10.0.0.#{i}"
        end #config.vm.define
  end #loop

  #copy local ssh key to vm with ansible
  config.vm.provision :ansible do |ansible|
        ansible.playbook = "vagrant-provision.yml"
        ## Debugging
        #ansible.verbose =  true
        #ansible.verbose="vvvvv"
  end

end #Vagrant.configure

我的盒子正确启动，它也可以通过定义的 IP 地址 (10.0.0.X) 访问，但这个地址在 eth1 上。Vagrant 首先创建了另一个接口 eth0，这个接口接收到一个 192.168.121.XXX 地址。我想摆脱这个，但我不知道如何。

这是vagrant ssh-config的输出：

$ vagrant ssh-config 
Host 10
  HostName 192.168.121.148
  User vagrant
  Port 22
  UserKnownHostsFile /dev/null
  StrictHostKeyChecking no
  PasswordAuthentication no
  IdentityFile /home/max/vagrant/vs/.vagrant/machines/10/libvirt/private_key
  IdentitiesOnly yes
  LogLevel FATAL

这是从虚拟机内部：

root@vs-10:~# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 52:54:00:b1:1f:fd brd ff:ff:ff:ff:ff:ff
    inet 192.168.121.148/24 brd 192.168.121.255 scope global dynamic eth0
       valid_lft 3503sec preferred_lft 3503sec
    inet6 fe80::5054:ff:feb1:1ffd/64 scope link 
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 52:54:00:c8:05:48 brd ff:ff:ff:ff:ff:ff
    inet 10.0.0.10/24 brd 10.0.0.255 scope global eth1
       valid_lft forever preferred_lft forever
root@vs-10:~# cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
# Include files from /etc/network/interfaces.d:
source-directory /etc/network/interfaces.d
#VAGRANT-BEGIN
# The contents below are automatically generated by Vagrant. Do not modify.
auto eth1
iface eth1 inet static
      address 10.0.0.10
      netmask 255.255.255.0
#VAGRANT-END

如您所见，我的 Vagrantfile 中定义的地址被插入到接口文件中，但用于 eth1. eth0 没有在那里定义，但在我运行ip addr时仍然显示。我想在接口eth0上有地址10.0.0.10并去掉192.168.121.XXX地址。