小编Syr*_*mid的帖子

我是初学者，我正在尝试将轮廓应用到左侧的白色遥控器上，该遥控器与背景颜色相同。

a = cv2.imread(file_name)
imgGray = cv2.cvtColor(a,cv2.COLOR_BGR2GRAY)

imgGray = cv2.GaussianBlur(imgGray,(11,11),20)

k5 = np.array([[-1,-1,-1],[-1,9,-1],[-1,-1,-1]])
imgGray = cv2.filter2D(imgGray,-1,k5)

cv2.namedWindow("Control")
cv2.createTrackbar("blocksize","Control",33,1000,f)
cv2.createTrackbar("c","Control",3,100,f)
while True:
    strel = cv2.getStructuringElement(cv2.MORPH_CROSS,(3,3))
    blocksize = cv2.getTrackbarPos("blocksize","Control")
    c = cv2.getTrackbarPos("c","Control")

    if blocksize%2==0:
        blocksize += 1
    thrash = cv2.adaptiveThreshold(imgGray,255,cv2.ADAPTIVE_THRESH_MEAN_C, cv2.THRESH_BINARY_INV,blockSize=blocksize,C=c)
    thrash1 = cv2.adaptiveThreshold(imgGray,255,cv2.ADAPTIVE_THRESH_GAUSSIAN_C,cv2.THRESH_BINARY_INV,blockSize=blocksize,C=c)

    cv2.imshow("mean",thrash)
    cv2.imshow("gaussian",thrash1)
    #r,thrash = cv2.threshold(imgGray,150,255,cv2.THRESH_BINARY_INV)
    key = cv2.waitKey(1000)
    if key == 32 or iter == -1:
         break


edges = cv2.Canny(thrash,100,200)
cv2.imshow('sharpen',sharpen)
cv2.imshow('edges',edges)
cv2.imshow('grey ',imgGray)
cv2.imshow('thrash ',thrash)
cv2.waitKey(0)
circles = cv2.HoughCircles(imgGray,cv2.HOUGH_GRADIENT,1,60,param1=240,param2=50,minRadius=0,maxRadius=0)
contours,_ = cv2.findContours(thrash,cv2.RETR_TREE,cv2.CHAIN_APPROX_NONE)
putlabel(circles,a,contours)

这些是我尝试过的，我也尝试过形态学操作，如膨胀、腐蚀、开闭，但我仍然无法获得结果。

下面是我的最佳结果，但噪音太严重，而且遥控器的轮廓也没有完全清晰。