我想画一条3D体素化线,即找到一条线经过的所有体素。3D Bresenham 总是会跳过一些体素。如图所示,3D bresenham生成的体素不能完全包含起始体素和目标体素之间的线。

这个链接中的算法:Algorithm for Drawing a 4-connected line可以解决我在2D平面上的问题,但我未能将其改进为3D。
In scipy there is no support for fitting discrete distributions using data. I know there are a lot of subject about this.
For example if i have an array like below:
x = [2,3,4,5,6,7,0,1,1,0,1,8,10,9,1,1,1,0,0]
I couldn't apply for this array:
from scipy.stats import nbinom
param = nbinom.fit(x)
Run Code Online (Sandbox Code Playgroud)
But i would like to ask you up to date, is there any way to fit for these three discrete distributions and then choose the best fit for the discrete dataset?
在 Visual Studio 代码中选择 WSL 作为默认终端后,我无法打开终端窗口。终端窗口打开,屏幕上出现随机文本,然后终端关闭并显示一条错误消息:“终端进程已终止,退出代码:4294967295”。
有人知道为什么吗?我查看了一些 vscode github 问题帖子,但我似乎无法使任何工作发挥作用。
请参阅我的 settings.json 文件的屏幕截图和下面发生的情况的 gif:


windows terminal visual-studio-code windows-subsystem-for-linux
假设我们有一个随机数生成器,可以生成随机的 32 位或 64 位整数(如标准库中的rand.Rand)
在给定范围内生成随机 int64[a,b]相当容易:
rand.Seed(time.Now().UnixNano())
n := rand.Int63n(b-a) + a
Run Code Online (Sandbox Code Playgroud)
是否可以从 32 位或 64 位随机整数的组合在给定范围内生成随机的 128 位十进制(如规范 IEEE 754-2008 中所定义)?
我正在研究使用足球比赛的视频,并尝试使用单应性将帧映射到球场的俯视图。我已经开始使用霍夫线以及线段检测器找到帧中的所有白线,其中线段检测器似乎工作得稍好一些。请参阅下面我的代码和示例:
import cv2
import numpy as np
cv2.imread("frame-27.jpg")
hsv = cv2.cvtColor(frame, cv2.COLOR_RGB2HSV)
mask_green = cv2.inRange(hsv, (36, 25, 25), (86, 255, 255)) # green mask to select only the field
frame_masked = cv2.bitwise_and(frame, frame, mask=mask_green)
gray = cv2.cvtColor(frame_masked, cv2.COLOR_RGB2GRAY)
_, thresh = cv2.threshold(gray, 127, 255, cv2.THRESH_BINARY)
canny = cv2.Canny(gray, 50, 150, apertureSize=3)
# Hough line detection
lines = cv2.HoughLinesP(canny, 1, np.pi / 180, 50, None, 50, 20)
# Line segment detection
lines_lsd = lsd.detect(canny)[0]
Run Code Online (Sandbox Code Playgroud)
这使用这个输入框架

并返回该图像的霍夫线

该图像用于线段检测。

我的问题有两个:(1)关于如何进一步完善线检测的任何想法(即减少误报,例如球员周围和场外的线)和(2)使用检测线创建一个好的方法单应性,这样我就可以将框架映射到该领域的更高概述(像这样)。任何帮助是极大的赞赏!
我正在构建一个应用程序,其中与第二个设备的连接是本质。因此,我使用了WifiNetworkSpecifier API。但是,一旦用户离开并返回 Wi-Fi 边界,应用程序必须能够自动重新连接到目标网络。因此,我使用了WifiNetworkSuggestion API。但是,我在那里遇到了几个问题:
到目前为止,根据我的经验和理解(这可能是错误的),似乎我们必须手动取消注册先前分配给说明符请求的网络回调,或者终止应用程序,然后让建议 API 完成它的工作,直到它可以工作适当地。如果边界中存在其他网络(用户之前使用 OS Wi-Fi 管理器连接到该网络),这可能会出现问题。在这种情况下,我们永远不会自动重新连接到应用程序定义的 SSID,建议 API 也永远不会工作。
问题是:如何将这两个 API 结合起来,以便能够连接到 SSID,但又可以自动重新连接,而不会进行手动断开用户连接或杀死应用程序等丑陋的黑客攻击,这也不能给我们任何保证?
在我看来,这个使用新网络 API 的全新实现做得不好,它给开发人员带来了很多问题和限制,或者至少它的文档很差。
这是用于发出请求的代码。请注意,我连接的设备没有实际的互联网访问权限,它只是用作 p2p 网络。
@RequiresApi(api = Build.VERSION_CODES.Q)
private fun connectToWiFiOnQ(wifiCredentials: WifiCredentials, onUnavailable: () -> Unit) {
val request = NetworkRequest.Builder()
.addTransportType(NetworkCapabilities.TRANSPORT_WIFI)
.removeCapability(NetworkCapabilities.NET_CAPABILITY_INTERNET)
.setNetworkSpecifier(createWifiNetworkSpecifier(wifiCredentials))
.build()
networkCallback = object : ConnectivityManager.NetworkCallback() {
override fun onAvailable(network: Network) {
super.onAvailable(network)
connectivityManager.bindProcessToNetwork(network)
}
override …Run Code Online (Sandbox Code Playgroud) android internet-connection android-networking android-wifi android-10.0
我有一个以字符串表示的 SVG 图形
svg_string='<svg height="100" width="500"><ellipse cx="240" cy="50" rx="220" ry="30" style="fill:yellow" /><ellipse cx="220" cy="50" rx="190" ry="20" style="fill:white" /></svg>'
Run Code Online (Sandbox Code Playgroud)
我想在Python启动的窗口上显示由 表示的图形svg_string,它是2个椭圆。
其伪代码应该是这样的
import pygame
def display_svg_figure(screen, svg_string):
# Code that draws the rendered SVG string on
# the screen
pass
background_colour = (255, 255, 255)
(width, height) = (900, 900)
screen = pygame.display.set_mode((width, height))
pygame.display.set_caption('Display SVG')
screen.fill(background_colour)
pygame.display.flip()
svg_string='<svg height="100" width="500"><ellipse cx="240" cy="50" rx="220" ry="30" style="fill:yellow" /><ellipse cx="220" cy="50" rx="190" ry="20" style="fill:white" /></svg>'
display_svg_figure(screen, svg_string)
running = True
while …Run Code Online (Sandbox Code Playgroud) 我正在尝试使用 Github Codespaces打开此存储库。请注意,此存储库已针对本地devcontainer开发正确配置。
但是,当我尝试在 CodeSpaces 中打开它时,它似乎正确构建了容器,但失败了:(Could not detect any language/platform in the source directory完整日志此处)
我缺少什么?
我正在寻找像Python的 random.randint() 这样的函数,它生成a和b之间的随机整数,但更有可能生成更接近a 的数字,只有少数更接近b。
有一个函数可以做到这一点吗?
我正在使用泰勒级数来计算一个数的 cos,对于小数,该函数返回准确的结果,例如cos(5)给出0.28366218546322663. 但是对于较大的数字,它会返回不准确的结果,例如cos(1000)给出1.2194074101485173e+225
def factorial(n):
c = n
for i in range(n-1, 0, -1):
c *= i
return c
def cos(x, i=100):
c = 2
n = 0
for i in range(i):
if i % 2 == 0:
n += ((x**c) / factorial(c))
else:
n -= ((x**c) / factorial(c))
c += 2
return 1 - n
Run Code Online (Sandbox Code Playgroud)
我尝试使用round(cos(1000), 8)put 它仍然返回一个用科学记数法书写的数字,1.2194074101485173e+225并带有 e+ 部分。math.cos(1000)给0.5623790762907029,我怎样才能四舍五入我的数字,使它们与 math.cos 方法相同?
python ×5
python-3.x ×2
random ×2
3d ×1
android ×1
android-10.0 ×1
android-wifi ×1
bresenham ×1
codespaces ×1
distribution ×1
go ×1
graphics ×1
math ×1
opencv ×1
opencv3.0 ×1
pygame ×1
scipy ×1
statistics ×1
svg ×1
terminal ×1
voxel ×1
windows ×1