什么是模仿iPhone上UIAlertView的弹跳动画的最佳方式?这有一些内置机制吗?UIAlertView本身不适合我的需求.
我查看了动画曲线,但据我所知,他们提供的只有easeIn,easeOut和linear.
我有一个长字符串(8,315个字符)的JSON,但我似乎无法使用Python将其写入.txt文件而不会被截断.
我将JSON写入文本文件,然后通过FTP上传,但我的系统上的.txt文件和FTP服务器上的.txt文件都被截断了.
这是代码:
# Upload the results
host = ftputil.FTPHost('ftp.website.com', 'username', 'password')
jsonOutput = json.dumps(full_json)
f = open('C:/Comparison.txt', 'w')
f.write(jsonOutput)
host.upload('C:/Comparison.txt', '/public_html/Comparison.txt')
f.close()
print jsonOutput
Run Code Online (Sandbox Code Playgroud)
控制台中的JSON输出有效且完整,但在写入的.txt文件中被截断(然后在上载后的.txt文件中).
大多数情况下,输出将在http://www.digikey.com/product-detail/en/A000073/1050-10实际完整URL时结束http://www.digikey.com/product-detail/en/A000073/1050-1041-ND/3476357(当然,它会切断其余的JSON)
我不确定这是否有任何区别,但我也尝试f.write(re.escape(jsonOutput)过相同的结果.
有人能帮忙吗?
我在隐藏和显示UINavigationBar时遇到了一些奇怪的行为.
在我的viewWillAppear方法中,我称之为:
self.navigationController.navigationBar.hidden = YES;
Run Code Online (Sandbox Code Playgroud)
当用户按下按钮时,我正在调用它:
self.navigationController.navigationBar.hidden = NO;
Run Code Online (Sandbox Code Playgroud)
然后使用自定义UINavigationController的viewControllers属性交换当前视图控制器.
这工作正常,但如果我尝试在viewWillDisappear方法中使用相同的行显示navigationBar ,它不起作用.navigationBar仍然是隐藏的.
我可以viewWillDisappear使用以下方法显示/隐藏状态栏:
[[UIApplication sharedApplication] setStatusBarHidden:YES withAnimation:UIStatusBarAnimationFade];
Run Code Online (Sandbox Code Playgroud)
但显示/隐藏UINavigationBar不起作用!
编辑:此外,我尝试显示栏后self.navigationController.isNavigationBarHidden返回NO,viewWillDisappear但栏仍然隐藏.
任何帮助将不胜感激.谢谢!
我的新西兰单元测试是否有一些原因导致这两行失败:
[[theValue([editAuthorViewController class] == [EditAuthorViewController class]) should] beYes];
[[theValue([editAuthorViewController isKindOfClass:[EditAuthorViewController class]]) should] beYes];
Run Code Online (Sandbox Code Playgroud)
虽然这条线路通过?
NSString *classString = NSStringFromClass([editAuthorViewController class]);
[[classString should] equal:@"EditAuthorViewController"];
Run Code Online (Sandbox Code Playgroud) ios ×3
cocoa-touch ×1
ios6 ×1
iphone ×1
json ×1
kiwi ×1
objective-c ×1
python ×1
uikit ×1
unit-testing ×1