相关疑难解决方法(0)

我正在研究编写嵌入式Linux驱动程序,并决定开发一些GPIO以确保我正确理解本书(LDD3,第9.4.1节).

我可以按照预期控制正确的GPIO引脚(使其高低,我用万用表探测); 但是,我测试了2个代码,一个有request_mem_region(),一个没有.我期待一个没有失败的人,但两个都工作得很好.

代码request_mem_region:

if( request_mem_region( PIN3_CONF_PHYS, MAPPED_SIZE_GPIO_CONF,DEVICE_NAME ) == NULL )
  {
    printk( KERN_ALERT
            "GPIO_140_141_conf_phys error:%s: unable to obtain I/O memory address 0x%08llX\n",
            DEVICE_NAME, PIN3_CONF_PHYS );

    return -EBUSY;
  }

pin3_conf = (u32)ioremap( PIN3_CONF_PHYS, MAPPED_SIZE_GPIO_CONF);
pin4_conf = (u32)ioremap( PIN4_CONF_PHYS, MAPPED_SIZE_GPIO_CONF);
pin5_conf = (u32)ioremap( PIN5_CONF_PHYS, MAPPED_SIZE_GPIO_CONF);
pin6_conf = (u32)ioremap( PIN6_CONF_PHYS, MAPPED_SIZE_GPIO_CONF);
//-----------------------------------------------------------------
if( request_mem_region( GPIO_BANK5_PHYS, MAPPED_SIZE_GPIO_5,DEVICE_NAME ) == NULL )
  {
    printk( KERN_ALERT
            "error:%s: unable to obtain I/O memory address 0x%08llX\n",
            DEVICE_NAME, GPIO_BANK5_PHYS );

    return …