Jig*_*hel 24 shutdown tomcat6 ubuntu-10.04
我正面临一些关于tomcat启动和关闭的问题.
我在用
我使用命令启动tomcat:
$./catalina.sh jpda start
然后我尝试使用命令停止它:
$./catalina.sh stop
并获得以下消息:
SEVERE: Catalina.stop:
java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:529)
at java.net.Socket.connect(Socket.java:478)
at java.net.Socket.<init>(Socket.java:375)
at java.net.Socket.<init>(Socket.java:189)
at org.apache.catalina.startup.Catalina.stopServer(Catalina.java:422)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.catalina.startup.Bootstrap.stopServer(Bootstrap.java:338)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:416)
我也尝试使用命令停止它:
$./catalina.sh stop -force
但我收到了消息:
Kill failed: $CATALINA_PID not set
然后我再次尝试使用命令启动tomcat:
$./catalina.sh jpda start
在/ logs文件夹中,仅生成catalina.out,并显示以下错误消息:
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
正如错误"已在使用的地址"中所示,我验证没有其他应用程序配置为在端口8080上运行.每次当我终止进程ID并重新启动它时,启动工作正常.这需要我在需要停止tomcat服务器时使用"KILL"命令手动终止进程. 我在其他机器上遇到的这种行为也是如此,其中设置了上述相同的环境.
任何人都可以让我知道是什么导致了这个以及如何解决这个问题？
谢谢,
Jignesh
Ste*_*azo 13
不要使用/etc/bash.bashrc将它放在你的catalina.sh上
后:
if [ -r "$CATALINA_BASE"/bin/setenv.sh ]; then
. "$CATALINA_BASE"/bin/setenv.sh
elif [ -r "$CATALINA_HOME"/bin/setenv.sh ]; then
. "$CATALINA_HOME"/bin/setenv.sh
fi
把这个:
export CATALINA_PID="$CATALINA_HOME/catalina_pid.txt"
现在,当你使用catalina.sh stop -force时你的tomcat会被杀死
修复了tomcat关闭的问题。在此将解决方案贴出来供参考。
请执行以下操作以在您的计算机上修复它：
1) Replace $CATALINA_HOME/bin/catalina.sh with catalina.sh shown below.
2) Open /etc/bash.bashrc for edit
3) Add following into it, (AFTER export CATALINA_HOME)
export CATALINA_PID="$CATALINA_HOME/catalina_pid.txt",
where $CATALINA_HOME is the tomcat home path
4) Execute following :
$ source /etc/bash.bashrc
5) Start tomcat: $CATALINA_HOME/bin/catalina.sh start (or catalina.sh jpda start)
6) Shutdown tomcat using following command only for proper shutdown:
$CATALINA_HOME/bin/catalina.sh stop -force
catalina.sh - 包含我的内联评论
#!/bin/sh
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# -----------------------------------------------------------------------------
# Start/Stop Script for the CATALINA Server
#
# Environment Variable Prerequisites
#
# CATALINA_HOME May point at your Catalina "build" directory.
#
# CATALINA_BASE (Optional) Base directory for resolving dynamic portions
# of a Catalina installation. If not present, resolves to
# the same directory that CATALINA_HOME points to.
#
# CATALINA_OUT (Optional) Full path to a file where stdout and stderr
# will be redirected.
# Default is $CATALINA_BASE/logs/catalina.out
#
# CATALINA_OPTS (Optional) Java runtime options used when the "start",
# or "run" command is executed.
#
# CATALINA_TMPDIR (Optional) Directory path location of temporary directory
# the JVM should use (java.io.tmpdir). Defaults to
# $CATALINA_BASE/temp.
#
# JAVA_HOME Must point at your Java Development Kit installation.
# Required to run the with the "debug" argument.
#
# JRE_HOME Must point at your Java Development Kit installation.
# Defaults to JAVA_HOME if empty.
#
# JAVA_OPTS (Optional) Java runtime options used when the "start",
# "stop", or "run" command is executed.
#
# JAVA_ENDORSED_DIRS (Optional) Lists of of colon separated directories
# containing some jars in order to allow replacement of APIs
# created outside of the JCP (i.e. DOM and SAX from W3C).
# It can also be used to update the XML parser implementation.
# Defaults to $CATALINA_HOME/endorsed.
#
# JPDA_TRANSPORT (Optional) JPDA transport used when the "jpda start"
# command is executed. The default is "dt_socket".
#
# JPDA_ADDRESS (Optional) Java runtime options used when the "jpda start"
# command is executed. The default is 8000.
#
# JPDA_SUSPEND (Optional) Java runtime options used when the "jpda start"
# command is executed. Specifies whether JVM should suspend
# execution immediately after startup. Default is "n".
#
# JPDA_OPTS (Optional) Java runtime options used when the "jpda start"
# command is executed. If used, JPDA_TRANSPORT, JPDA_ADDRESS,
# and JPDA_SUSPEND are ignored. Thus, all required jpda
# options MUST be specified. The default is:
#
# -agentlib:jdwp=transport=$JPDA_TRANSPORT,
# address=$JPDA_ADDRESS,server=y,suspend=$JPDA_SUSPEND
#
# CATALINA_PID (Optional) Path of the file which should contains the pid
# of catalina startup java process, when start (fork) is used
#
# LOGGING_CONFIG (Optional) Override Tomcat's logging config file
# Example (all one line)
# LOGGING_CONFIG="-Djava.util.logging.config.file=$CATALINA_BASE/conf/logging.properties"
#
# LOGGING_MANAGER (Optional) Override Tomcat's logging manager
# Example (all one line)
# LOGGING_MANAGER="-Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager"
#
# $Id: catalina.sh 1040547 2010-11-30 14:47:49Z markt $
# -----------------------------------------------------------------------------
# OS specific support. $var _must_ be set to either true or false.
cygwin=false
os400=false
darwin=false
case "`uname`" in
CYGWIN*) cygwin=true;;
OS400*) os400=true;;
Darwin*) darwin=true;;
esac
# resolve links - $0 may be a softlink
PRG="$0"
while [ -h "$PRG" ]; do
ls=`ls -ld "$PRG"`
link=`expr "$ls" : '.*-> \(.*\)$'`
if expr "$link" : '/.*' > /dev/null; then
PRG="$link"
else
PRG=`dirname "$PRG"`/"$link"
fi
done
# Get standard environment variables
PRGDIR=`dirname "$PRG"`
# Only set CATALINA_HOME if not already set
[ -z "$CATALINA_HOME" ] && CATALINA_HOME=`cd "$PRGDIR/.." >/dev/null; pwd`
# Ensure that any user defined CLASSPATH variables are not used on startup,
# but allow them to be specified in setenv.sh, in rare case when it is needed.
CLASSPATH=
if [ -r "$CATALINA_BASE"/bin/setenv.sh ]; then
. "$CATALINA_BASE"/bin/setenv.sh
elif [ -r "$CATALINA_HOME"/bin/setenv.sh ]; then
. "$CATALINA_HOME"/bin/setenv.sh
fi
# For Cygwin, ensure paths are in UNIX format before anything is touched
if $cygwin; then
[ -n "$JAVA_HOME" ] && JAVA_HOME=`cygpath --unix "$JAVA_HOME"`
[ -n "$JRE_HOME" ] && JRE_HOME=`cygpath --unix "$JRE_HOME"`
[ -n "$CATALINA_HOME" ] && CATALINA_HOME=`cygpath --unix "$CATALINA_HOME"`
[ -n "$CATALINA_BASE" ] && CATALINA_BASE=`cygpath --unix "$CATALINA_BASE"`
[ -n "$CLASSPATH" ] && CLASSPATH=`cygpath --path --unix "$CLASSPATH"`
fi
# For OS400
if $os400; then
# Set job priority to standard for interactive (interactive - 6) by using
# the interactive priority - 6, the helper threads that respond to requests
# will be running at the same priority as interactive jobs.
COMMAND='chgjob job('$JOBNAME') runpty(6)'
system $COMMAND
# Enable multi threading
export QIBM_MULTI_THREADED=Y
fi
# Get standard Java environment variables
if $os400; then
# -r will Only work on the os400 if the files are:
# 1. owned by the user
# 2. owned by the PRIMARY group of the user
# this will not work if the user belongs in secondary groups
BASEDIR="$CATALINA_HOME"
. "$CATALINA_HOME"/bin/setclasspath.sh
else
if [ -r "$CATALINA_HOME"/bin/setclasspath.sh ]; then
BASEDIR="$CATALINA_HOME"
. "$CATALINA_HOME"/bin/setclasspath.sh
else
echo "Cannot find $CATALINA_HOME/bin/setclasspath.sh"
echo "This file is needed to run this program"
exit 1
fi
fi
if [ -z "$CATALINA_BASE" ] ; then
CATALINA_BASE="$CATALINA_HOME"
fi
# Add tomcat-juli.jar and bootstrap.jar to classpath
# tomcat-juli.jar can be over-ridden per instance
if [ ! -z "$CLASSPATH" ] ; then
CLASSPATH="$CLASSPATH":
fi
if [ "$CATALINA_BASE" != "$CATALINA_HOME" ] && [ -r "$CATALINA_BASE/bin/tomcat-juli.jar" ] ; then
CLASSPATH="$CLASSPATH""$CATALINA_BASE"/bin/tomcat-juli.jar:"$CATALINA_HOME"/bin/bootstrap.jar
else
CLASSPATH="$CLASSPATH""$CATALINA_HOME"/bin/bootstrap.jar
fi
if [ -z "$CATALINA_OUT" ] ; then
CATALINA_OUT="$CATALINA_BASE"/logs/catalina.out
fi
if [ -z "$CATALINA_TMPDIR" ] ; then
# Define the java.io.tmpdir to use for Catalina
CATALINA_TMPDIR="$CATALINA_BASE"/temp
fi
# Bugzilla 37848: When no TTY is available, don't output to console
have_tty=0
if [ "`tty`" != "not a tty" ]; then
have_tty=1
fi
# For Cygwin, switch paths to Windows format before running java
if $cygwin; then
JAVA_HOME=`cygpath --absolute --windows "$JAVA_HOME"`
JRE_HOME=`cygpath --absolute --windows "$JRE_HOME"`
CATALINA_HOME=`cygpath --absolute --windows "$CATALINA_HOME"`
CATALINA_BASE=`cygpath --absolute --windows "$CATALINA_BASE"`
CATALINA_TMPDIR=`cygpath --absolute --windows "$CATALINA_TMPDIR"`
CLASSPATH=`cygpath --path --windows "$CLASSPATH"`
JAVA_ENDORSED_DIRS=`cygpath --path --windows "$JAVA_ENDORSED_DIRS"`
fi
# Set juli LogManager config file if it is present and an override has not been issued
if [ -z "$LOGGING_CONFIG" ]; then
if [ -r "$CATALINA_BASE"/conf/logging.properties ]; then
LOGGING_CONFIG="-Djava.util.logging.config.file=$CATALINA_BASE/conf/logging.properties"
else
# Bugzilla 45585
LOGGING_CONFIG="-Dnop"
fi
fi
if [ -z "$LOGGING_MANAGER" ]; then
JAVA_OPTS="$JAVA_OPTS -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager"
else
JAVA_OPTS="$JAVA_OPTS $LOGGING_MANAGER"
fi
# ----- Execute The Requested Command -----------------------------------------
# Bugzilla 37848: only output this if we have a TTY
if [ $have_tty -eq 1 ]; then
echo "Using CATALINA_BASE: $CATALINA_BASE"
echo "Using CATALINA_HOME: $CATALINA_HOME"
echo "Using CATALINA_TMPDIR: $CATALINA_TMPDIR"
if [ "$1" = "debug" ] ; then
echo "Using JAVA_HOME: $JAVA_HOME"
else
echo "Using JRE_HOME: $JRE_HOME"
fi
echo "Using CLASSPATH: $CLASSPATH"
if [ ! -z "$CATALINA_PID" ]; then
# Added by Jignesh Gohel - Nov 08, 2011.
# There was an issue occuring when shutting down tomcat using
# command ./catalina.sh stop
# Issue mentioned at : http://stackoverflow.com/questions/7890197/facing-some-issues-regarding-tomcat-startup-and-shutdown-on-ubuntu-10-04
# Tomcat was shutting down properly but the process started using
# command ./catalina.sh start was not getting killed.
# To resolve this issue following steps taken :-
# 1) Exported an environment variable named CATALINA_PID which
# should point to a file in which the tomcat process id would be
# written.
# Note: Using the normal command to shutdown tomcat "./catalina.sh stop"
# following message was logged "Tomcat did not stop in time. PID file
# was not removed".Thus to shutdown the tomcat using following command
# "./catalina.sh stop -force" which forcefully kills the tomcat process
# and also removes the file pointed by environment variable
# "$CATALINA_PID".Thus executing a "touch" command when starting up
# tomcat to automatically create the file.
touch "$CATALINA_PID"
echo "Using CATALINA_PID: $CATALINA_PID"
fi
fi
if [ "$1" = "jpda" ] ; then
if [ -z "$JPDA_TRANSPORT" ]; then
JPDA_TRANSPORT="dt_socket"
fi
if [ -z "$JPDA_ADDRESS" ]; then
JPDA_ADDRESS="8000"
fi
if [ -z "$JPDA_SUSPEND" ]; then
JPDA_SUSPEND="n"
fi
if [ -z "$JPDA_OPTS" ]; then
JPDA_OPTS="-agentlib:jdwp=transport=$JPDA_TRANSPORT,address=$JPDA_ADDRESS,server=y,suspend=$JPDA_SUSPEND"
fi
CATALINA_OPTS="$CATALINA_OPTS $JPDA_OPTS"
shift
fi
if [ "$1" = "debug" ] ; then
if $os400; then
echo "Debug command not available on OS400"
exit 1
else
shift
if [ "$1" = "-security" ] ; then
if [ $have_tty -eq 1 ]; then
echo "Using Security Manager"
fi
shift
exec "$_RUNJDB" "$LOGGING_CONFIG" $JAVA_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs="$JAVA_ENDORSED_DIRS" -classpath "$CLASSPATH" \
-sourcepath "$CATALINA_HOME"/../../java \
-Djava.security.manager \
-Djava.security.policy=="$CATALINA_BASE"/conf/catalina.policy \
-Dcatalina.base="$CATALINA_BASE" \
-Dcatalina.home="$CATALINA_HOME" \
-Djava.io.tmpdir="$CATALINA_TMPDIR" \
org.apache.catalina.startup.Bootstrap "$@" start
else
exec "$_RUNJDB" "$LOGGING_CONFIG" $JAVA_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs="$JAVA_ENDORSED_DIRS" -classpath "$CLASSPATH" \
-sourcepath "$CATALINA_HOME"/../../java \
-Dcatalina.base="$CATALINA_BASE" \
-Dcatalina.home="$CATALINA_HOME" \
-Djava.io.tmpdir="$CATALINA_TMPDIR" \
org.apache.catalina.startup.Bootstrap "$@" start
fi
fi
elif [ "$1" = "run" ]; then
shift
if [ "$1" = "-security" ] ; then
if [ $have_tty -eq 1 ]; then
echo "Using Security Manager"
fi
shift
exec "$_RUNJAVA" "$LOGGING_CONFIG" $JAVA_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs="$JAVA_ENDORSED_DIRS" -classpath "$CLASSPATH" \
-Djava.security.manager \
-Djava.security.policy=="$CATALINA_BASE"/conf/catalina.policy \
-Dcatalina.base="$CATALINA_BASE" \
-Dcatalina.home="$CATALINA_HOME" \
-Djava.io.tmpdir="$CATALINA_TMPDIR" \
org.apache.catalina.startup.Bootstrap "$@" start
else
exec "$_RUNJAVA" "$LOGGING_CONFIG" $JAVA_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs="$JAVA_ENDORSED_DIRS" -classpath "$CLASSPATH" \
-Dcatalina.base="$CATALINA_BASE" \
-Dcatalina.home="$CATALINA_HOME" \
-Djava.io.tmpdir="$CATALINA_TMPDIR" \
org.apache.catalina.startup.Bootstrap "$@" start
fi
elif [ "$1" = "start" ] ; then
if [ ! -z "$CATALINA_PID" ]; then
if [ -f "$CATALINA_PID" ]; then
if [ -s "$CATALINA_PID" ]; then
echo "Existing PID file found during start."
if [ -r "$CATALINA_PID" ]; then
PID=`cat "$CATALINA_PID"`
ps -p $PID >/dev/null 2>&1
if [ $? -eq 0 ] ; then
echo "Tomcat appears to still be running with PID $PID. Start aborted."
exit 1
else
echo "Removing/clearing stale PID file."
rm -f "$CATALINA_PID" >/dev/null 2>&1
if [ $? != 0 ]; then
if [ -w "$CATALINA_PID" ]; then
cat /dev/null > "$CATALINA_PID"
else
echo "Unable to remove or clear stale PID file. Start aborted."
exit 1
fi
fi
fi
else
echo "Unable to read PID file. Start aborted."
exit 1
fi
else
rm -f "$CATALINA_PID" >/dev/null 2>&1
if [ $? != 0 ]; then
if [ ! -w "$CATALINA_PID" ]; then
echo "Unable to remove or write to empty PID file. Start aborted."
exit 1
fi
fi
fi
fi
fi
shift
touch "$CATALINA_OUT"
if [ "$1" = "-security" ] ; then
if [ $have_tty -eq 1 ]; then
echo "Using Security Manager"
fi
shift
"$_RUNJAVA" "$LOGGING_CONFIG" $JAVA_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs="$JAVA_ENDORSED_DIRS" -classpath "$CLASSPATH" \
-Djava.security.manager \
-Djava.security.policy=="$CATALINA_BASE"/conf/catalina.policy \
-Dcatalina.base="$CATALINA_BASE" \
-Dcatalina.home="$CATALINA_HOME" \
-Djava.io.tmpdir="$CATALINA_TMPDIR" \
org.apache.catalina.startup.Bootstrap "$@" start \
>> "$CATALINA_OUT" 2>&1 &
else
"$_RUNJAVA" "$LOGGING_CONFIG" $JAVA_OPTS $CATALINA_OPTS \
-Djava.endorsed.dirs="$JAVA_ENDORSED_DIRS" -classpath "$CLASSPATH" \
-Dcatalina.base="$CATALINA_BASE" \
-Dcatalina.home="$CATALINA_HOME" \
-Djava.io.tmpdir="$CATALINA_TMPDIR" \
org.apache.catalina.startup.Bootstrap "$@" start \
>> "$CATALINA_OUT" 2>&1 &
fi
if [ ! -z "$CATALINA_PID" ]; then
echo $! > "$CATALINA_PID"
fi
elif [ "$1" = "stop" ] ; then
shift
SLEEP=5
if [ ! -z "$1" ]; then
| 归档时间： |
|
| 查看次数： |
65194 次 |
| 最近记录： |