AttributeError: 模块 'scipy.misc' 没有属性 'toimage'

Question

在执行以下代码时：

scipy.misc.toimage(output * 255, high=255, low=0, cmin=0, cmax=255).save(
    params.result_dir + 'final/%5d_00_%d_out.png' % (test_id, ratio))

我收到以下错误：

AttributeError: 模块 'scipy.misc' 没有属性 'toimage'

我尝试按照此处所述安装 Pillow：scipy.misc module has no attribute imread? 但同样的错误仍然存​​在。请帮忙。谢谢。

Answer 1

该scipy.misc.toimage()函数在 Scipy 1.0.0 中被弃用，并在 1.3.0 版本中完全删除。从1.3.0 发行说明：

来自scipy.interpolate( spleval, spline, splmake, and spltopp) 的函数和来自scipy.misc( bytescale, fromimage, imfilter, imread, imresize, imrotate, imsave, imshow, toimage) 的函数已被删除。前一组自 v0.19.0 起已弃用，而后者已自 v1.0.0 起弃用。

注释链接到 v1.1.0 文档，显示了要使用的内容；来自scipy.misc.toimage()v1.1.0的文档：

Image.fromarray直接使用 Pillow's代替。

然而，该函数所做的工作比它所Image.fromarray能做的更多。您可以移植原始功能：

import numpy as np
from PIL import Image


_errstr = "Mode is unknown or incompatible with input array shape."


def bytescale(data, cmin=None, cmax=None, high=255, low=0):
    """
    Byte scales an array (image).
    Byte scaling means converting the input image to uint8 dtype and scaling
    the range to ``(low, high)`` (default 0-255).
    If the input image already has dtype uint8, no scaling is done.
    This function is only available if Python Imaging Library (PIL) is installed.
    Parameters
    ----------
    data : ndarray
        PIL image data array.
    cmin : scalar, optional
        Bias scaling of small values. Default is ``data.min()``.
    cmax : scalar, optional
        Bias scaling of large values. Default is ``data.max()``.
    high : scalar, optional
        Scale max value to `high`.  Default is 255.
    low : scalar, optional
        Scale min value to `low`.  Default is 0.
    Returns
    -------
    img_array : uint8 ndarray
        The byte-scaled array.
    Examples
    --------
    >>> from scipy.misc import bytescale
    >>> img = np.array([[ 91.06794177,   3.39058326,  84.4221549 ],
    ...                 [ 73.88003259,  80.91433048,   4.88878881],
    ...                 [ 51.53875334,  34.45808177,  27.5873488 ]])
    >>> bytescale(img)
    array([[255,   0, 236],
           [205, 225,   4],
           [140,  90,  70]], dtype=uint8)
    >>> bytescale(img, high=200, low=100)
    array([[200, 100, 192],
           [180, 188, 102],
           [155, 135, 128]], dtype=uint8)
    >>> bytescale(img, cmin=0, cmax=255)
    array([[91,  3, 84],
           [74, 81,  5],
           [52, 34, 28]], dtype=uint8)
    """
    if data.dtype == np.uint8:
        return data

    if high > 255:
        raise ValueError("`high` should be less than or equal to 255.")
    if low < 0:
        raise ValueError("`low` should be greater than or equal to 0.")
    if high < low:
        raise ValueError("`high` should be greater than or equal to `low`.")

    if cmin is None:
        cmin = data.min()
    if cmax is None:
        cmax = data.max()

    cscale = cmax - cmin
    if cscale < 0:
        raise ValueError("`cmax` should be larger than `cmin`.")
    elif cscale == 0:
        cscale = 1

    scale = float(high - low) / cscale
    bytedata = (data - cmin) * scale + low
    return (bytedata.clip(low, high) + 0.5).astype(np.uint8)


def toimage(arr, high=255, low=0, cmin=None, cmax=None, pal=None,
            mode=None, channel_axis=None):
    """Takes a numpy array and returns a PIL image.
    This function is only available if Python Imaging Library (PIL) is installed.
    The mode of the PIL image depends on the array shape and the `pal` and
    `mode` keywords.
    For 2-D arrays, if `pal` is a valid (N,3) byte-array giving the RGB values
    (from 0 to 255) then ``mode='P'``, otherwise ``mode='L'``, unless mode
    is given as 'F' or 'I' in which case a float and/or integer array is made.
    .. warning::
        This function uses `bytescale` under the hood to rescale images to use
        the full (0, 255) range if ``mode`` is one of ``None, 'L', 'P', 'l'``.
        It will also cast data for 2-D images to ``uint32`` for ``mode=None``
        (which is the default).
    Notes
    -----
    For 3-D arrays, the `channel_axis` argument tells which dimension of the
    array holds the channel data.
    For 3-D arrays if one of the dimensions is 3, the mode is 'RGB'
    by default or 'YCbCr' if selected.
    The numpy array must be either 2 dimensional or 3 dimensional.
    """
    data = np.asarray(arr)
    if np.iscomplexobj(data):
        raise ValueError("Cannot convert a complex-valued array.")
    shape = list(data.shape)
    valid = len(shape) == 2 or ((len(shape) == 3) and
                                ((3 in shape) or (4 in shape)))
    if not valid:
        raise ValueError("'arr' does not have a suitable array shape for "
                         "any mode.")
    if len(shape) == 2:
        shape = (shape[1], shape[0])  # columns show up first
        if mode == 'F':
            data32 = data.astype(np.float32)
            image = Image.frombytes(mode, shape, data32.tostring())
            return image
        if mode in [None, 'L', 'P']:
            bytedata = bytescale(data, high=high, low=low,
                                 cmin=cmin, cmax=cmax)
            image = Image.frombytes('L', shape, bytedata.tostring())
            if pal is not None:
                image.putpalette(np.asarray(pal, dtype=np.uint8).tostring())
                # Becomes a mode='P' automagically.
            elif mode == 'P':  # default gray-scale
                pal = (np.arange(0, 256, 1, dtype=np.uint8)[:, np.newaxis] *
                       np.ones((3,), dtype=np.uint8)[np.newaxis, :])
                image.putpalette(np.asarray(pal, dtype=np.uint8).tostring())
            return image
        if mode == '1':  # high input gives threshold for 1
            bytedata = (data > high)
            image = Image.frombytes('1', shape, bytedata.tostring())
            return image
        if cmin is None:
            cmin = np.amin(np.ravel(data))
        if cmax is None:
            cmax = np.amax(np.ravel(data))
        data = (data*1.0 - cmin)*(high - low)/(cmax - cmin) + low
        if mode == 'I':
            data32 = data.astype(np.uint32)
            image = Image.frombytes(mode, shape, data32.tostring())
        else:
            raise ValueError(_errstr)
        return image

    # if here then 3-d array with a 3 or a 4 in the shape length.
    # Check for 3 in datacube shape --- 'RGB' or 'YCbCr'
    if channel_axis is None:
        if (3 in shape):
            ca = np.flatnonzero(np.asarray(shape) == 3)[0]
        else:
            ca = np.flatnonzero(np.asarray(shape) == 4)
            if len(ca):
                ca = ca[0]
            else:
                raise ValueError("Could not find channel dimension.")
    else:
        ca = channel_axis

    numch = shape[ca]
    if numch not in [3, 4]:
        raise ValueError("Channel axis dimension is not valid.")

    bytedata = bytescale(data, high=high, low=low, cmin=cmin, cmax=cmax)
    if ca == 2:
        strdata = bytedata.tostring()
        shape = (shape[1], shape[0])
    elif ca == 1:
        strdata = np.transpose(bytedata, (0, 2, 1)).tostring()
        shape = (shape[2], shape[0])
    elif ca == 0:
        strdata = np.transpose(bytedata, (1, 2, 0)).tostring()
        shape = (shape[2], shape[1])
    if mode is None:
        if numch == 3:
            mode = 'RGB'
        else:
            mode = 'RGBA'

    if mode not in ['RGB', 'RGBA', 'YCbCr', 'CMYK']:
        raise ValueError(_errstr)

    if mode in ['RGB', 'YCbCr']:
        if numch != 3:
            raise ValueError("Invalid array shape for mode.")
    if mode in ['RGBA', 'CMYK']:
        if numch != 4:
            raise ValueError("Invalid array shape for mode.")

    # Here we know data and mode is correct
    image = Image.frombytes(mode, shape, strdata)
    return image

这可以根据使用的实际参数进一步简化；例如，您的示例代码不使用该pal参数。