间歇性的Python线程错误,"主线程不在主循环中"

Question

中年爸爸(电气工程师不是贸易程序员)试图教我13岁的女儿电子和编程.到目前为止,我喜欢Python.我正在构建一个程序,通过tkinter GUI和DS18B20传感器显示整个房屋的温度.

我们将下面的程序拼凑起来,从阅读书籍,在线研究和使用Stack Overflow来解决问题(这个网站摇滚!).

现在我们感到难过,我们不断出现间歇性错误,当我们在Raspberry上加载空闲后第一次运行程序时,它运行正常.

第二次,以及随后的所有时间,我们收到此错误消息:

Traceback (most recent call last):
  File "/home/pi/Code-working-library/stackoverflow-paste.py", line 140, in <module>
    app.equipTemp.set(tempread)
  File "/usr/lib/python2.7/lib-tk/Tkinter.py", line 203, in set
    return self._tk.globalsetvar(self._name, value)
RuntimeError: main thread is not in main loop

注意,我们的理解是,为了获得一个静态窗口并更新标签更新的温度读取我们的传感器(DS18B20),我们需要使用一个线程.我们开始的示例代码的_init_语句只有一个下划线在前面和后面 - 不知道为什么,如果我添加第二个下划线,我会收到错误消息.我们用作基础的更新窗口代码来自Raspberry Pi论坛

这是我们的代码:

from Tkinter import *
import tkFont
import os
import glob
import time
import subprocess
import re
import sys
import time
import threading
import Image 
import ImageTk

os.system('modprobe w1-gpio')
os.system('modprobe w1-therm')

#28-000005c6ba08

sensors = ['28-000005c6ba08'] 
sensors1 = ['28-000005c70f69'] 

def read_temp_raw():
    catdata = subprocess.Popen(['cat',device_file], stdout=subprocess.PIPE, stderr=subprocess.PIPE)
    out,err = catdata.communicate()
    out_decode = out.decode('utf-8')
    lines = out_decode.split('\n')
    return lines

def read_temp():
    lines = read_temp_raw()
    while lines[0].strip()[-3:] != 'YES':
        time.sleep(0.2)
        lines = read_temp_raw()
    equals_pos = lines[1].find('t=')
    if equals_pos != -1:
        temp_string = lines[1][equals_pos+2:]
        temp_c = float(temp_string) / 1000.0
        temp_f = temp_c * 9.0 / 5.0 + 32.0
        return temp_f

###########  build window  ###################

bground="grey"


class App(threading.Thread):

    def _init_(self):    
        threading.Thread._init_(self)
        self.start()

    def callback(self):
        self.root.quit()        


    def run(self):

        #Make the window
        self.root = Tk() 
        self.root.wm_title("Home Management System")
        self.root.minsize(1440,1000)

        self.equipTemp = StringVar()   
        self.equipTemp1 = StringVar()
        self.equipTemp2 = StringVar()       

        self.customFont = tkFont.Font(family="Helvetica", size=16)

        #   1st floor Image
        img = Image.open("HOUSE-PLANS-01.png") 
        photo = ImageTk.PhotoImage(img)

        Label1=Label(self.root, image=photo)
        Label1.place(x=100, y=100)

        #   2nd floor
        img2 = Image.open("HOUSE-PLANS-02.png")
        photo2 = ImageTk.PhotoImage(img2)

        Label1=Label(self.root, image=photo2)
        Label1.place(x=600, y=100)

        #   Basement image
        img3 = Image.open("HOUSE-PLANS-03.png")
        photo3 = ImageTk.PhotoImage(img3)

        Label1=Label(self.root, image=photo3)
        Label1.place(x=100, y=500)

        #   Attic Image
        img4 = Image.open("HOUSE-PLANS-04.png")
        photo4 = ImageTk.PhotoImage(img4)

        Label1=Label(self.root, image=photo4)
        Label1.place(x=600, y=500)

        #   House Isometric Image
        img5 = Image.open("house-iso.png")
        photo5 = ImageTk.PhotoImage(img5)

        Label1=Label(self.root, image=photo5)
        Label1.place(x=1080, y=130)

        #Garage Temp Label
        Label2=Label(self.root, textvariable=self.equipTemp, width=6, justify=RIGHT, font=self.customFont)
        Label2.place(x=315, y=265)



        print "start monitoring and updating the GUI"

        self.root.mainloop() #start monitoring and updating the GUI



###########  Start Loop    ###################

print "starting app"

app = App()
app.start()

print "app started"


###################  Begin ds18b20 function  ##############

while True:

    #   28-000005c6ba08
    i = "28-000005c6ba08"
    base_dir = '/sys/bus/w1/devices/'
    device_folder = glob.glob(base_dir + i)[0]
    device_file = device_folder + '/w1_slave'

    tempread=round(read_temp(),1)


    app.equipTemp.set(tempread)
    time.sleep(5)

    ##################### END ds18b20 Function  ######

Answer 1

您需要在主线程中运行GUI代码，并且您的温度读取代码需要在后台线程中。只有在主线程中更新 GUI 才是安全的，因此您可以通过 a 将从后台线程读取的温度数据传递回主线程Queue，并让主线程使用以下命令定期检查队列中的数据self.root.after()：

from Tkinter import *
import tkFont
import os
import glob
import time
import threading
import Image 
import Queue


def update_temp(queue):
    """ Read the temp data. This runs in a background thread. """
    while True:
        #   28-000005c6ba08
        i = "28-000005c6ba08"
        base_dir = '/sys/bus/w1/devices/'
        device_folder = glob.glob(base_dir + i)[0]
        device_file = device_folder + '/w1_slave'

        tempread=round(read_temp(),1)

        # Pass the temp back to the main thread.
        queue.put(tempread)
        time.sleep(5)

class Gui(object):
    def __init__(self, queue):
        self.queue = queue

        #Make the window
        self.root = Tk() 
        self.root.wm_title("Home Management System")
        self.root.minsize(1440,1000)

        self.equipTemp = StringVar()   
        self.equipTemp1 = StringVar()
        self.equipTemp2 = StringVar()       

        self.customFont = tkFont.Font(family="Helvetica", size=16)

        #   1st floor Image
        img = Image.open("HOUSE-PLANS-01.png") 
        photo = ImageTk.PhotoImage(img)

        Label1=Label(self.root, image=photo)
        Label1.place(x=100, y=100)

        #   2nd floor
        img2 = Image.open("HOUSE-PLANS-02.png")
        photo2 = ImageTk.PhotoImage(img2)

        Label1=Label(self.root, image=photo2)
        Label1.place(x=600, y=100)

        #   Basement image
        img3 = Image.open("HOUSE-PLANS-03.png")
        photo3 = ImageTk.PhotoImage(img3)

        Label1=Label(self.root, image=photo3)
        Label1.place(x=100, y=500)

        #   Attic Image
        img4 = Image.open("HOUSE-PLANS-04.png")
        photo4 = ImageTk.PhotoImage(img4)

        Label1=Label(self.root, image=photo4)
        Label1.place(x=600, y=500)

        #   House Isometric Image
        img5 = Image.open("house-iso.png")
        photo5 = ImageTk.PhotoImage(img5)

        Label1=Label(self.root, image=photo5)
        Label1.place(x=1080, y=130)

        #Garage Temp Label
        Label2=Label(self.root, textvariable=self.equipTemp, width=6, justify=RIGHT, font=self.customFont)
        Label2.place(x=315, y=265)

        print "start monitoring and updating the GUI"

        # Schedule read_queue to run in the main thread in one second.
        self.root.after(1000, self.read_queue)

    def read_queue(self):
        """ Check for updated temp data"""
        try:
            temp = self.queue.get_nowait()
            self.equipTemp.set(temp)
        except Queue.Empty:
            # It's ok if there's no data to read.
            # We'll just check again later.
            pass
        # Schedule read_queue again in one second.
        self.root.after(1000, self.read_queue)

if __name__ == "__main__":
    queue = Queue.Queue()
    # Start background thread to get temp data
    t = threading.Thread(target=update_temp, args=(queue,))
    t.start()
    print "starting app"
    # Build GUI object
    gui = Gui(queue)
    # Start mainloop
    gui.root.mainloop()

编辑：

在实际查看了 tkinter 源代码以及 Python bug 跟踪器之后，似乎与几乎所有其他 GUI 库不同，tkinter旨在是线程安全的，只要您在主线程中运行主循环的应用程序。请参阅我在此处添加的答案以获取更多信息，或者直接转到此处的Python 错误跟踪器上有关 tkinter 线程安全性的已解决问题。如果 tkinter 源代码和 Python 的错误跟踪器是正确的，这意味着只要您在主线程中运行主循环，您就可以愉快地gui.equipTemp.set()直接从温度读取线程调用 - 不需要Queue。在我的测试中，这确实工作得很好。