HSL到RGB颜色转换

Question

我正在寻找一种工具或算法来将HSL颜色转换为RGB.在我看来,HSL并没有被广泛使用,所以我没有太多运气寻找转换器.

Answer 1

Garry Tan在他的博客上发布了一个Javascript解决方案(他将其归于一个现已解散的mjijackson.com,但在此归档,原作者有一个要点 - 感谢user2441511).

代码重新发布如下:

HSL到RGB:

/**
 * Converts an HSL color value to RGB. Conversion formula
 * adapted from http://en.wikipedia.org/wiki/HSL_color_space.
 * Assumes h, s, and l are contained in the set [0, 1] and
 * returns r, g, and b in the set [0, 255].
 *
 * @param   {number}  h       The hue
 * @param   {number}  s       The saturation
 * @param   {number}  l       The lightness
 * @return  {Array}           The RGB representation
 */
function hslToRgb(h, s, l){
    var r, g, b;

    if(s == 0){
        r = g = b = l; // achromatic
    }else{
        var hue2rgb = function hue2rgb(p, q, t){
            if(t < 0) t += 1;
            if(t > 1) t -= 1;
            if(t < 1/6) return p + (q - p) * 6 * t;
            if(t < 1/2) return q;
            if(t < 2/3) return p + (q - p) * (2/3 - t) * 6;
            return p;
        }

        var q = l < 0.5 ? l * (1 + s) : l + s - l * s;
        var p = 2 * l - q;
        r = hue2rgb(p, q, h + 1/3);
        g = hue2rgb(p, q, h);
        b = hue2rgb(p, q, h - 1/3);
    }

    return [Math.round(r * 255), Math.round(g * 255), Math.round(b * 255)];
}

RGB到HSL:

/**
 * Converts an RGB color value to HSL. Conversion formula
 * adapted from http://en.wikipedia.org/wiki/HSL_color_space.
 * Assumes r, g, and b are contained in the set [0, 255] and
 * returns h, s, and l in the set [0, 1].
 *
 * @param   {number}  r       The red color value
 * @param   {number}  g       The green color value
 * @param   {number}  b       The blue color value
 * @return  {Array}           The HSL representation
 */
function rgbToHsl(r, g, b){
    r /= 255, g /= 255, b /= 255;
    var max = Math.max(r, g, b), min = Math.min(r, g, b);
    var h, s, l = (max + min) / 2;

    if(max == min){
        h = s = 0; // achromatic
    }else{
        var d = max - min;
        s = l > 0.5 ? d / (2 - max - min) : d / (max + min);
        switch(max){
            case r: h = (g - b) / d + (g < b ? 6 : 0); break;
            case g: h = (b - r) / d + 2; break;
            case b: h = (r - g) / d + 4; break;
        }
        h /= 6;
    }

    return [h, s, l];
}

Answer 2

发现最简单的方法,蟒蛇救援:D

colorsys.hls_to_rgb(h, l, s)

将颜色从HLS坐标转换为RGB坐标.

Answer 3

Java实现Mohsen的代码

请注意,所有整数都声明为float(即1f)并且必须为float,否则您将选择灰色.

HSL到RGB

 /**
 * Converts an HSL color value to RGB. Conversion formula
 * adapted from http://en.wikipedia.org/wiki/HSL_color_space.
 * Assumes h, s, and l are contained in the set [0, 1] and
 * returns r, g, and b in the set [0, 255].
 *
 * @param h       The hue
 * @param s       The saturation
 * @param l       The lightness
 * @return int array, the RGB representation
 */
public static int[] hslToRgb(float h, float s, float l){
    float r, g, b;

    if (s == 0f) {
        r = g = b = l; // achromatic
    } else {
        float q = l < 0.5f ? l * (1 + s) : l + s - l * s;
        float p = 2 * l - q;
        r = hueToRgb(p, q, h + 1f/3f);
        g = hueToRgb(p, q, h);
        b = hueToRgb(p, q, h - 1f/3f);
    }
    int[] rgb = {to255(r), to255(g), to255(b)};
    return rgb;
}
public static int to255(float v) { return (int)Math.min(255,256*v); }

/** Helper method that converts hue to rgb */
public static float hueToRgb(float p, float q, float t) {
    if (t < 0f)
        t += 1f;
    if (t > 1f)
        t -= 1f;
    if (t < 1f/6f)
        return p + (q - p) * 6f * t;
    if (t < 1f/2f)
        return q;
    if (t < 2f/3f)
        return p + (q - p) * (2f/3f - t) * 6f;
    return p;
}

RGB到HSL

/**
 * Converts an RGB color value to HSL. Conversion formula
 * adapted from http://en.wikipedia.org/wiki/HSL_color_space.
 * Assumes pR, pG, and bpBare contained in the set [0, 255] and
 * returns h, s, and l in the set [0, 1].
 *
 * @param pR       The red color value
 * @param pG       The green color value
 * @param pB       The blue color value
 * @return float array, the HSL representation
 */
public static float[] rgbToHsl(int pR, int pG, int pB) {
    float r = pR / 255f;
    float g = pG / 255f;
    float b = pB / 255f;

    float max = (r > g && r > b) ? r : (g > b) ? g : b;
    float min = (r < g && r < b) ? r : (g < b) ? g : b;

    float h, s, l;
    l = (max + min) / 2.0f;

    if (max == min) {
        h = s = 0.0f;
    } else {
        float d = max - min;
        s = (l > 0.5f) ? d / (2.0f - max - min) : d / (max + min);

        if (r > g && r > b)
            h = (g - b) / d + (g < b ? 6.0f : 0.0f);

        else if (g > b)
            h = (b - r) / d + 2.0f;

        else
            h = (r - g) / d + 4.0f;

        h /= 6.0f;
    }

    float[] hsl = {h, s, l};
    return hsl;
}

Answer 4

维基百科上的HSL和HSV文章包含一些公式.计算有点棘手,因此查看现有实现可能很有用.

Answer 5

如果您正在寻找与HSL和RGB的CSS语义完全一致的内容,您可以使用CSS 3规范中指定的算法,该算法如下:

HOW TO RETURN hsl.to.rgb(h, s, l): 
   SELECT: 
      l<=0.5: PUT l*(s+1) IN m2
      ELSE: PUT l+s-l*s IN m2
   PUT l*2-m2 IN m1
   PUT hue.to.rgb(m1, m2, h+1/3) IN r
   PUT hue.to.rgb(m1, m2, h    ) IN g
   PUT hue.to.rgb(m1, m2, h-1/3) IN b
   RETURN (r, g, b)

HOW TO RETURN hue.to.rgb(m1, m2, h): 
   IF h<0: PUT h+1 IN h
   IF h>1: PUT h-1 IN h
   IF h*6<1: RETURN m1+(m2-m1)*h*6
   IF h*2<1: RETURN m2
   IF h*3<2: RETURN m1+(m2-m1)*(2/3-h)*6
   RETURN m1

我相信这是其他一些答案的来源.

Answer 6

来自Mohsen答案的C#代码.

以下是Mohsen在C#中的回答代码,如果有其他人想要的话.注意:Color是一个自定义类,Vector4来自OpenTK.两者都很容易用您选择的其他东西替换.

Hsl To Rgba

/// <summary>
/// Converts an HSL color value to RGB.
/// Input: Vector4 ( X: [0.0, 1.0], Y: [0.0, 1.0], Z: [0.0, 1.0], W: [0.0, 1.0] )
/// Output: Color ( R: [0, 255], G: [0, 255], B: [0, 255], A: [0, 255] )
/// </summary>
/// <param name="hsl">Vector4 defining X = h, Y = s, Z = l, W = a. Ranges [0, 1.0]</param>
/// <returns>RGBA Color. Ranges [0, 255]</returns>
public static Color HslToRgba(Vector4 hsl)
{
    float r, g, b;

    if (hsl.Y == 0.0f)
        r = g = b = hsl.Z;

    else
    {
        var q = hsl.Z < 0.5f ? hsl.Z * (1.0f + hsl.Y) : hsl.Z + hsl.Y - hsl.Z * hsl.Y;
        var p = 2.0f * hsl.Z - q;
        r = HueToRgb(p, q, hsl.X + 1.0f / 3.0f);
        g = HueToRgb(p, q, hsl.X);
        b = HueToRgb(p, q, hsl.X - 1.0f / 3.0f);
    }

    return new Color((int)(r * 255), (int)(g * 255), (int)(b * 255), (int)(hsl.W * 255));
}

// Helper for HslToRgba
private static float HueToRgb(float p, float q, float t)
{
    if (t < 0.0f) t += 1.0f;
    if (t > 1.0f) t -= 1.0f;
    if (t < 1.0f / 6.0f) return p + (q - p) * 6.0f * t;
    if (t < 1.0f / 2.0f) return q;
    if (t < 2.0f / 3.0f) return p + (q - p) * (2.0f / 3.0f - t) * 6.0f;
    return p;
}

Rgba To Hsl

/// <summary>
/// Converts an RGB color value to HSL.
/// Input: Color ( R: [0, 255], G: [0, 255], B: [0, 255], A: [0, 255] )
/// Output: Vector4 ( X: [0.0, 1.0], Y: [0.0, 1.0], Z: [0.0, 1.0], W: [0.0, 1.0] )
/// </summary>
/// <param name="rgba"></param>
/// <returns></returns>
public static Vector4 RgbaToHsl(Color rgba)
{
    float r = rgba.R / 255.0f;
    float g = rgba.G / 255.0f;
    float b = rgba.B / 255.0f;

    float max = (r > g && r > b) ? r : (g > b) ? g : b;
    float min = (r < g && r < b) ? r : (g < b) ? g : b;

    float h, s, l;
    h = s = l = (max + min) / 2.0f;

    if (max == min)
        h = s = 0.0f;

    else
    {
        float d = max - min;
        s = (l > 0.5f) ? d / (2.0f - max - min) : d / (max + min);

        if (r > g && r > b)
            h = (g - b) / d + (g < b ? 6.0f : 0.0f);

        else if (g > b)
            h = (b - r) / d + 2.0f;

        else
            h = (r - g) / d + 4.0f;

        h /= 6.0f;
    }

    return new Vector4(h, s, l, rgba.A / 255.0f);
}

Answer 7

这就是我的操作方式，很容易记住的是将RGB视为轮毂上三个辐条（相距120度）。

H = hue (0-360)
S = saturation (0-1)
L = luminance (0-1)

R1 = SIN( H ) * L 
G1 = SIN( H + 120 ) * L 
B1 = SIN( H + 240 ) * L 

棘手的部分是饱和度，它要缩小到这三者的平均值。

AVERAGE = (R1 + G1 + B1) / 3 

R2 = ((R1 - AVERAGE) * S) + AVERAGE 
G2 = ((G1 - AVERAGE) * S) + AVERAGE 
B2 = ((B1 - AVERAGE) * S) + AVERAGE 

RED = R2 * 255 
GREEN = G2 * 255 
BLUE = B2 * 255 

Answer 8

这是 GLSL 中的快速、超级简单、无分支版本：

vec3 hsl2rgb( vec3 c ) {
    vec3 rgb = clamp(abs(mod(c.x*6.0 + vec3(0.0, 4.0, 2.0), 6.0)-3.0)-1.0, 0.0, 1.0);
    return c.z + c.y * (rgb-0.5)*(1.0-abs(2.0*c.z-1.0));
}

没有比这更短的了~

原始概念验证链接： https://www.shadertoy.com/view/XljGzV

（免责声明：不是我的代码！）

Answer 9

实施Chris的C#代码

也是从这里,它很好地解释了它的数学.

这基本上是一组转换为HSL和从HSL转换的函数(Hue Saturation Lightness)

测试并使用PHP 5.6.15

TL; DR:完整的代码可以在Pastebin上找到.

Hex到HSL

输入:十六进制颜色格式:[#] 0f4或[#] 00ff44(井号可选)
输出:HSL度,百分比,百分比

/**
 * Input: hex color
 * Output: hsl(in ranges from 0-1)
 * 
 * Takes the hex, converts it to RGB, and sends
 * it to RGBToHsl.  Returns the output.
 * 
*/
function hexToHsl($hex) {
    $r = "";
    $g = "";
    $b = "";

    $hex = str_replace('#', '', $hex);

    if (strlen($hex) == 3) {
        $r = substr($hex, 0, 1);
        $r = $r . $r;
        $g = substr($hex, 1, 1);
        $g = $g . $g;
        $b = substr($hex, 2, 1);
        $b = $b . $b;
    } elseif (strlen($hex) == 6) {
        $r = substr($hex, 0, 2);
        $g = substr($hex, 2, 2);
        $b = substr($hex, 4, 2);
    } else {
        return false;
    }

    $r = hexdec($r);
    $g = hexdec($g);
    $b = hexdec($b);

    $hsl =  rgbToHsl($r,$g,$b);
    return $hsl;
}

RGB到HSL

输入:RGB范围0-255输出:HSL(度,百分比,百分比).

/**
 * 
 *Credits:
 * https://stackoverflow.com/questions/4793729/rgb-to-hsl-and-back-calculation-problems
 * http://www.niwa.nu/2013/05/math-behind-colorspace-conversions-rgb-hsl/
 *
 * Called by hexToHsl by default.
 *
 * Converts an RGB color value to HSL. Conversion formula
 * adapted from http://www.niwa.nu/2013/05/math-behind-colorspace-conversions-rgb-hsl/.
 * Assumes r, g, and b are contained in the range [0 - 255] and
 * returns h, s, and l in the format Degrees, Percent, Percent.
 *
 * @param   Number  r       The red color value
 * @param   Number  g       The green color value
 * @param   Number  b       The blue color value
 * @return  Array           The HSL representation
*/
function rgbToHsl($r, $g, $b){  
    //For the calculation, rgb needs to be in the range from 0 to 1. To convert, divide by 255 (ff). 
    $r /= 255;
    $g /= 255;
    $b /= 255;

    $myMax = max($r, $g, $b);
    $myMin = min($r, $g, $b);

    $maxAdd = ($myMax + $myMin);
    $maxSub = ($myMax - $myMin);

    //luminence is (max + min)/2
    $h = 0;
    $s = 0;
    $l = ($maxAdd / 2.0);

    //if all the numbers are equal, there is no saturation (greyscale).
    if($myMin != $myMax){
        if ($l < 0.5) {
            $s = ($maxSub / $maxAdd);
        } else {
            $s = (2.0 - $myMax - $myMin); //note order of opperations - can't use $maxSub here
            $s = ($maxSub / $s);
        }

        //find hue
        switch($myMax){
            case $r: 
                $h = ($g - $b);
                $h = ($h / $maxSub);
                break;
            case $g: 
                $h = ($b - $r); 
                $h = ($h / $maxSub);
                $h = ($h + 2.0);
                break;
            case $b: 
                $h = ($r - $g);
                $h = ($h / $maxSub); 
                $h = ($h + 4.0);
                break;
        } 
    }

    $hsl = hslToDegPercPerc($h, $s, $l);
    return $hsl;
}

HSL(0-1范围)到度,百分比,百分比格式

对于数学计算,HSL在0-1范围内更容易处理,但是对于人类可读性,它在度数,百分比,百分比方面更容易.此函数在范围0-1中采用HSL,并以度,百分比,百分比形式返回HSL.

/**
 * Input: HSL in ranges 0-1.
 * Output: HSL in format Deg, Perc, Perc.
 * 
 * Note: rgbToHsl calls this function by default.
 * 
 * Multiplies $h by 60, and $s and $l by 100.
 */
function hslToDegPercPerc($h, $s, $l) {
    //convert h to degrees
    $h *= 60;

    if ($h < 0) {
        $h += 360;
    }

    //convert s and l to percentage
    $s *= 100;
    $l *= 100;

    $hsl['h'] = $h;
    $hsl['s'] = $s;
    $hsl['l'] = $l;
    return $hsl;
}

HSL(度,百分比,百分比格式)到HSL的范围是0-1

此函数将格式为Degrees,Percent,Percent的HSL转换为0-1范围,以便于计算.

/**
 * Input: HSL in format Deg, Perc, Perc
 * Output: An array containing HSL in ranges 0-1
 * 
 * Divides $h by 60, and $s and $l by 100.
 * 
 * hslToRgb calls this by default.
*/
function degPercPercToHsl($h, $s, $l) { 
    //convert h, s, and l back to the 0-1 range

    //convert the hue's 360 degrees in a circle to 1
    $h /= 360;

    //convert the saturation and lightness to the 0-1 
    //range by multiplying by 100
    $s /= 100;
    $l /= 100;

    $hsl['h'] =  $h;
    $hsl['s'] = $s;
    $hsl['l'] = $l;

    return $hsl;
}

HSL到RGB

输入:HSL格式为Degrees,Percent,Percent Output:RGB格式255, 255, 255.

/**
 * Converts an HSL color value to RGB. Conversion formula
 * adapted from http://www.niwa.nu/2013/05/math-behind-colorspace-conversions-rgb-hsl/.
 * Assumes h, s, and l are in the format Degrees,
 * Percent, Percent, and returns r, g, and b in 
 * the range [0 - 255].
 *
 * Called by hslToHex by default.
 *
 * Calls: 
 *   degPercPercToHsl
 *   hueToRgb
 *
 * @param   Number  h       The hue value
 * @param   Number  s       The saturation level
 * @param   Number  l       The luminence
 * @return  Array           The RGB representation
 */
function hslToRgb($h, $s, $l){
    $hsl = degPercPercToHsl($h, $s, $l);
    $h = $hsl['h'];
    $s = $hsl['s'];
    $l = $hsl['l'];

    //If there's no saturation, the color is a greyscale,
    //so all three RGB values can be set to the lightness.
    //(Hue doesn't matter, because it's grey, not color)
    if ($s == 0) {
        $r = $l * 255;
        $g = $l * 255;
        $b = $l * 255;
    }
    else {
        //calculate some temperary variables to make the 
        //calculation eaisier.
        if ($l < 0.5) {
            $temp2 = $l * (1 + $s);
        } else {
            $temp2 = ($l + $s) - ($s * $l);
        }
        $temp1 = 2 * $l - $temp2;

        //run the calculated vars through hueToRgb to
        //calculate the RGB value.  Note that for the Red
        //value, we add a third (120 degrees), to adjust 
        //the hue to the correct section of the circle for
        //red.  Simalarly, for blue, we subtract 1/3.
        $r = 255 * hueToRgb($temp1, $temp2, $h + (1 / 3));
        $g = 255 * hueToRgb($temp1, $temp2, $h);
        $b = 255 * hueToRgb($temp1, $temp2, $h - (1 / 3));
    }

    $rgb['r'] = $r;
    $rgb['g'] = $g;
    $rgb['b'] = $b;

    return $rgb;
}

Hue到RGB

hslToRgb调用此函数将hue转换为单独的RGB值.

/**
 * Converts an HSL hue to it's RGB value.  
 *
 * Input: $temp1 and $temp2 - temperary vars based on 
 * whether the lumanence is less than 0.5, and 
 * calculated using the saturation and luminence
 * values.
 *  $hue - the hue (to be converted to an RGB 
 * value)  For red, add 1/3 to the hue, green 
 * leave it alone, and blue you subtract 1/3 
 * from the hue.
 *
 * Output: One RGB value.
 *
 * Thanks to Easy RGB for this function (Hue_2_RGB).
 * http://www.easyrgb.com/index.php?X=MATH&$h=19#text19
 *
*/
function hueToRgb($temp1, $temp2, $hue) {
    if ($hue < 0) { 
        $hue += 1;
    }
    if ($hue > 1) {
        $hue -= 1;
    }

    if ((6 * $hue) < 1 ) {
        return ($temp1 + ($temp2 - $temp1) * 6 * $hue);
    } elseif ((2 * $hue) < 1 ) {
        return $temp2;
    } elseif ((3 * $hue) < 2 ) {
        return ($temp1 + ($temp2 - $temp1) * ((2 / 3) - $hue) * 6);
    }
    return $temp1;
}

HSL到十六进制

输入:HSL格式为度,百分比,百分比输出:十六进制格式00ff22(无井号).

转换为RGB,然后单独转换为十六进制.

/**
 * Converts HSL to Hex by converting it to 
 * RGB, then converting that to hex.
 * 
 * string hslToHex($h, $s, $l[, $prependPound = true]
 * 
 * $h is the Degrees value of the Hue
 * $s is the Percentage value of the Saturation
 * $l is the Percentage value of the Lightness
 * $prependPound is a bool, whether you want a pound 
 *  sign prepended. (optional - default=true)
 *
 * Calls: 
 *   hslToRgb
 *
 * Output: Hex in the format: #00ff88 (with 
 * pound sign).  Rounded to the nearest whole
 * number.
*/
function hslToHex($h, $s, $l, $prependPound = true) {
    //convert hsl to rgb
    $rgb = hslToRgb($h,$s,$l);

    //convert rgb to hex
    $hexR = $rgb['r'];
    $hexG = $rgb['g'];
    $hexB = $rgb['b'];

    //round to the nearest whole number
    $hexR = round($hexR);
    $hexG = round($hexG);
    $hexB = round($hexB);

    //convert to hex
    $hexR = dechex($hexR);
    $hexG = dechex($hexG);
    $hexB = dechex($hexB);

    //check for a non-two string length
    //if it's 1, we can just prepend a
    //0, but if it is anything else non-2,
    //it must return false, as we don't 
    //know what format it is in.
    if (strlen($hexR) != 2) {
        if (strlen($hexR) == 1) {
            //probably in format #0f4, etc.
            $hexR = "0" . $hexR;
        } else {
            //unknown format
            return false;
        }
    }
    if (strlen($hexG) != 2) {
        if (strlen($hexG) == 1) {
            $hexG = "0" . $hexG;
        } else {
            return false;
        }
    }
    if (strlen($hexB) != 2) {
        if (strlen($hexB) == 1) {
            $hexB = "0" . $hexB;
        } else {
            return false;
        }
    }

    //if prependPound is set, will prepend a
    //# sign to the beginning of the hex code.
    //(default = true)
    $hex = "";
    if ($prependPound) {
        $hex = "#";
    }

    $hex = $hex . $hexR . $hexG . $hexB;

    return $hex;
}

Answer 10

最短但精确 - JS

使用此 JS 代码（更多：rgb2hsl、hsv2rgb rgb2hsv和hsl2hsv）- php here

// input: h in [0,360] and s,v in [0,1] - output: r,g,b in [0,1]
function hsl2rgb(h,s,l) 
{
  let a=s*Math.min(l,1-l);
  let f= (n,k=(n+h/30)%12) => l - a*Math.max(Math.min(k-3,9-k,1),-1);                 
  return [f(0),f(8),f(4)];
}   

// input: h in [0,360] and s,v in [0,1] - output: r,g,b in [0,1]
function hsl2rgb(h,s,l) 
{
  let a=s*Math.min(l,1-l);
  let f= (n,k=(n+h/30)%12) => l - a*Math.max(Math.min(k-3,9-k,1),-1);                 
  return [f(0),f(8),f(4)];
}   

// oneliner version
let hsl2rgb = (h,s,l, a=s*Math.min(l,1-l), f= (n,k=(n+h/30)%12) => l - a*Math.max(Math.min(k-3,9-k,1),-1)) => [f(0),f(8),f(4)];

// r,g,b are in [0-1], result e.g. #0812fa.
let rgb2hex = (r,g,b) => "#" + [r,g,b].map(x=>Math.round(x*255).toString(16).padStart(2,0) ).join('');


console.log(`hsl: (30,0.2,0.3) --> rgb: (${hsl2rgb(30,0.2,0.3)}) --> hex: ${rgb2hex(...hsl2rgb(30,0.2,0.3))}`);



// ---------------
// UX
// ---------------

rgb= [0,0,0];
hs= [0,0,0];

let $ = x => document.querySelector(x);

function changeRGB(i,e) {
  rgb[i]=e.target.value/255;
  hs = rgb2hsl(...rgb);
  refresh();
}

function changeHS(i,e) {
  hs[i]=e.target.value/(i?255:1);
  rgb= hsl2rgb(...hs);
  refresh();
}

function refresh() {
  rr = rgb.map(x=>x*255|0).join(', ')
  hh = rgb2hex(...rgb);
  tr = `RGB: ${rr}`
  th = `HSL: ${hs.map((x,i)=>i? (x*100).toFixed(2)+'%':x|0).join(', ')}`
  thh= `HEX: ${hh}`
  $('.box').style.backgroundColor=`rgb(${rr})`;  
  $('.infoRGB').innerHTML=`${tr}`;  
  $('.infoHS').innerHTML =`${th}\n${thh}`;  
  
  $('#r').value=rgb[0]*255;
  $('#g').value=rgb[1]*255;
  $('#b').value=rgb[2]*255;
  
  $('#h').value=hs[0];
  $('#s').value=hs[1]*255;
  $('#l').value=hs[2]*255;  
}

function rgb2hsl(r,g,b) {
  let a=Math.max(r,g,b), n=a-Math.min(r,g,b), f=(1-Math.abs(a+a-n-1)); 
  let h= n && ((a==r) ? (g-b)/n : ((a==g) ? 2+(b-r)/n : 4+(r-g)/n)); 
  return [60*(h<0?h+6:h), f ? n/f : 0, (a+a-n)/2];
}

refresh();

.box {
  width: 50px;
  height: 50px;
  margin: 20px;
}

body {
    display: flex;
}

这是我在维基+错误分析中发现并精确描述的公式，