开始后直接传播退出

Question

我只是尝试开始传播我的一些工具,我用它来集成不同的传感器数据流程.

在启动传播退出后,出现以下消息:

Conf_load_conf_file: using file: spread.conf
Successfully configured Segment 0 [127.0.0.255:4803] with 2 procs:
               localhost: 127.0.0.1
                   boron: 127.0.1.1
Finished configuration file.
Hash value for this configuration is: 913193717
Conf_load_conf_file: My proc id (129.70.129.5) is not in configuration
Exit caused by Alarm(EXIT)

如消息中所示,我使用以下spread.conf文件来配置我的本地扩展段.

Spread_Segment 127.0.0.255:4803 {
 localhost 127.0.0.1
 boron 127.0.1.1
}

Answer 1

问题似乎是我正在工作的本地机器没有根据传播出现在配置文件中.Spread尝试在.conf文件中找到acutal IP 129.70.129.5而不是localhost.将.conf文件更改为:

Spread_Segment 127.0.0.255:4803 {
 localhost 127.0.0.1
 boron 129.70.129.5
}

或者开始传播

spread -n localhost

诀窍.