tmi*_*hty 18 c++ windows audio codec opus
我正在尝试将Opus文件解码回原始的48 kHz.但是,我无法找到任何示例代码来执行此操作.
我目前的代码是这样的:
void COpusCodec::Decode(unsigned char* encoded, short* decoded, unsigned int len)
{
int max_size=960*6;//not sure about this one
int error;
dec = opus_decoder_create(48000, 1, &error);//decode to 48kHz mono
int frame_size=opus_decode(dec, encoded, len, decoded, max_size, 0);
}
Run Code Online (Sandbox Code Playgroud)
"编码"这个参数可能是更大量的数据,所以我认为我必须把它分成帧.我不知道怎么能这样做.
作为Opus的初学者,我真的害怕搞砸了.
有人可能会帮忙吗?
seh*_*ehe 33
我认为opus_demo.c
来自源tarball的程序有你想要的.
但它非常复杂,因为所有不相关的代码都与之相关
事实证明,删除所有这些位是一项非常繁琐的工作.但是一旦你这样做,你最终会得到非常干净,易懂的代码,见下文.
请注意我
主要是因为它似乎没有使代码复杂化,您可能对它感兴趣.
我用两种方式测试了这个程序:
opus_demo
使用此剥离的解码器正确解码先前使用的单声道wav ).测试波形为~23Mb,压缩2.9Mb../opus_demo -d 48000 1 <opus-file> <pcm-file>
.结果文件与md5sum
使用剥离解码器解码的文件具有相同的校验和.主要更新 I C++ - ified代码.这应该可以让你使用iostreams.
fin.readsome
现在注意循环; 这个循环可以做成'异步'(即它可以返回,并在新数据到达时继续读取(在你的Decode
函数的下一个调用中?)[1]vector
,unique_ptr
)替换了"全部"手动内存管理,以实现异常安全性和健壮性.OpusErrorException
派生类std::exception
,用于传播错误libopus
在这里查看所有代码+ Makefile:https://github.com/sehe/opus/tree/master/contrib
[1]对于真正的异步IO(例如网络或串行通信),请考虑使用Boost Asio,请参阅http://www.boost.org/doc/libs/1_53_0/doc/html/boost_asio/overview/networking/iostreams.html
// (c) Seth Heeren 2013
//
// Based on src/opus_demo.c in opus-1.0.2
// License see http://www.opus-codec.org/license/
#include <stdexcept>
#include <memory>
#include <iosfwd>
struct OpusErrorException : public virtual std::exception
{
OpusErrorException(int code) : code(code) {}
const char* what() const noexcept;
private:
const int code;
};
struct COpusCodec
{
COpusCodec(int32_t sampling_rate, int channels);
~COpusCodec();
bool decode_frame(std::istream& fin, std::ostream& fout);
private:
struct Impl;
std::unique_ptr<Impl> _pimpl;
};
Run Code Online (Sandbox Code Playgroud)
// (c) Seth Heeren 2013
//
// Based on src/opus_demo.c in opus-1.0.2
// License see http://www.opus-codec.org/license/
#include "COpusCodec.hpp"
#include <vector>
#include <iomanip>
#include <memory>
#include <sstream>
#include "opus.h"
#define MAX_PACKET 1500
const char* OpusErrorException::what() const noexcept
{
return opus_strerror(code);
}
// I'd suggest reading with boost::spirit::big_dword or similar
static uint32_t char_to_int(char ch[4])
{
return static_cast<uint32_t>(static_cast<unsigned char>(ch[0])<<24) |
static_cast<uint32_t>(static_cast<unsigned char>(ch[1])<<16) |
static_cast<uint32_t>(static_cast<unsigned char>(ch[2])<< 8) |
static_cast<uint32_t>(static_cast<unsigned char>(ch[3])<< 0);
}
struct COpusCodec::Impl
{
Impl(int32_t sampling_rate = 48000, int channels = 1)
:
_channels(channels),
_decoder(nullptr, &opus_decoder_destroy),
_state(_max_frame_size, MAX_PACKET, channels)
{
int err = OPUS_OK;
auto raw = opus_decoder_create(sampling_rate, _channels, &err);
_decoder.reset(err == OPUS_OK? raw : throw OpusErrorException(err) );
}
bool decode_frame(std::istream& fin, std::ostream& fout)
{
char ch[4] = {0};
if (!fin.read(ch, 4) && fin.eof())
return false;
uint32_t len = char_to_int(ch);
if(len>_state.data.size())
throw std::runtime_error("Invalid payload length");
fin.read(ch, 4);
const uint32_t enc_final_range = char_to_int(ch);
const auto data = reinterpret_cast<char*>(&_state.data.front());
size_t read = 0ul;
for (auto append_position = data; fin && read<len; append_position += read)
{
read += fin.readsome(append_position, len-read);
}
if(read<len)
{
std::ostringstream oss;
oss << "Ran out of input, expecting " << len << " bytes got " << read << " at " << fin.tellg();
throw std::runtime_error(oss.str());
}
int output_samples;
const bool lost = (len==0);
if(lost)
{
opus_decoder_ctl(_decoder.get(), OPUS_GET_LAST_PACKET_DURATION(&output_samples));
}
else
{
output_samples = _max_frame_size;
}
output_samples = opus_decode(
_decoder.get(),
lost ? NULL : _state.data.data(),
len,
_state.out.data(),
output_samples,
0);
if(output_samples>0)
{
for(int i=0; i<(output_samples)*_channels; i++)
{
short s;
s=_state.out[i];
_state.fbytes[2*i] = s&0xFF;
_state.fbytes[2*i+1] = (s>>8)&0xFF;
}
if(!fout.write(reinterpret_cast<char*>(_state.fbytes.data()), sizeof(short)* _channels * output_samples))
throw std::runtime_error("Error writing");
}
else
{
throw OpusErrorException(output_samples); // negative return is error code
}
uint32_t dec_final_range;
opus_decoder_ctl(_decoder.get(), OPUS_GET_FINAL_RANGE(&dec_final_range));
/* compare final range encoder rng values of encoder and decoder */
if(enc_final_range!=0
&& !lost && !_state.lost_prev
&& dec_final_range != enc_final_range)
{
std::ostringstream oss;
oss << "Error: Range coder state mismatch between encoder and decoder in frame " << _state.frameno << ": " <<
"0x" << std::setw(8) << std::setfill('0') << std::hex << (unsigned long)enc_final_range <<
"0x" << std::setw(8) << std::setfill('0') << std::hex << (unsigned long)dec_final_range;
throw std::runtime_error(oss.str());
}
_state.lost_prev = lost;
_state.frameno++;
return true;
}
private:
const int _channels;
const int _max_frame_size = 960*6;
std::unique_ptr<OpusDecoder, void(*)(OpusDecoder*)> _decoder;
struct State
{
State(int max_frame_size, int max_payload_bytes, int channels) :
out (max_frame_size*channels),
fbytes(max_frame_size*channels*sizeof(decltype(out)::value_type)),
data (max_payload_bytes)
{ }
std::vector<short> out;
std::vector<unsigned char> fbytes, data;
int32_t frameno = 0;
bool lost_prev = true;
};
State _state;
};
COpusCodec::COpusCodec(int32_t sampling_rate, int channels)
: _pimpl(std::unique_ptr<Impl>(new Impl(sampling_rate, channels)))
{
//
}
COpusCodec::~COpusCodec()
{
// this instantiates the pimpl deletor code on the, now-complete, pimpl class
}
bool COpusCodec::decode_frame(
std::istream& fin,
std::ostream& fout)
{
return _pimpl->decode_frame(fin, fout);
}
Run Code Online (Sandbox Code Playgroud)
// (c) Seth Heeren 2013
//
// Based on src/opus_demo.c in opus-1.0.2
// License see http://www.opus-codec.org/license/
#include <fstream>
#include <iostream>
#include "COpusCodec.hpp"
int main(int argc, char *argv[])
{
if(argc != 3)
{
std::cerr << "Usage: " << argv[0] << " <input> <output>\n";
return 255;
}
std::basic_ifstream<char> fin (argv[1], std::ios::binary);
std::basic_ofstream<char> fout(argv[2], std::ios::binary);
if(!fin) throw std::runtime_error("Could not open input file");
if(!fout) throw std::runtime_error("Could not open output file");
try
{
COpusCodec codec(48000, 1);
size_t frames = 0;
while(codec.decode_frame(fin, fout))
{
frames++;
}
std::cout << "Successfully decoded " << frames << " frames\n";
}
catch(OpusErrorException const& e)
{
std::cerr << "OpusErrorException: " << e.what() << "\n";
return 255;
}
}
Run Code Online (Sandbox Code Playgroud)
hex*_*wab 14
libopus提供了一个API,用于将opus数据包转换为PCM数据块,反之亦然.
但是要将opus数据包存储在文件中,您需要某种容器格式来存储数据包边界. opus_demo
嗯,是一个演示应用程序:它有自己的最小容器格式用于测试目的,没有记录,因此opus_demo
不应该分发生成的文件.opus文件的标准容器格式是Ogg,它还支持元数据和样本精确解码以及有效搜索可变比特率流.Ogg Opus文件的扩展名为".opus".
Ogg Opus规范位于https://wiki.xiph.org/OggOpus.
(由于Opus也是一种VoIP编解码器,因此Opus的使用不需要容器,例如直接通过UDP传输Opus数据包.)
首先,您应该使用opusenc
opus-tools 对文件进行编码,而不是opus_demo
.其他软件也可以生成Ogg Opus文件(例如,我相信gstreamer和ffmpeg可以)但是你不能真的出错opus-tools,因为它是参考实现.
然后,假设您的文件是标准的Ogg Opus文件(可以通过Firefox读取),您需要做的是:(a)从Ogg容器中提取opus数据包; (b)将数据包传递给libopus并获取原始PCM.
方便的是,有一个名为libopusfile的库正是这样做的.libopusfile支持Ogg Opus流的所有功能,包括元数据和搜索(包括通过HTTP连接寻找).
libopus文件位于https://git.xiph.org/?p=opusfile.git和https://github.com/xiph/opusfile.此处记录了 API ,opusfile_example.c
(xiph.org | github)提供了解码为WAV的示例代码.因为你在Windows上我应该添加下载页面上有预建的DLL .
归档时间: |
|
查看次数: |
21402 次 |
最近记录: |