NMAP连续ping

Question

我需要实现一个能够每秒向一定数量的目的地发送ping数据包的代码。问题是我想在1秒窗口内ping尽可能多的目的地。出于这个原因，我在考虑是否有一种方法可以将循环强加到nmap中[我的意思是-cycle nmap参数]，这样套接字只能打开一次并在循环ping结束时关闭，这比使用a节省了更多时间“观看nmap”方法！

Answer 1

Nmap项目的一部分是Nping工具。它旨在完全满足您的需求，并且可配置。这是一个示例运行：

$ sudo nping --rate 4 --icmp 192.168.1.4/30

Starting Nping 0.6.26SVN ( http://nmap.org/nping ) at 2013-02-08 11:53 CST
SENT (0.0192s) ICMP 192.168.1.142 > 192.168.1.5 Echo request (type=8/code=0) ttl=64 id=53659 iplen=28 
SENT (0.2692s) ICMP 192.168.1.142 > 192.168.1.6 Echo request (type=8/code=0) ttl=64 id=53659 iplen=28 
SENT (0.5193s) ICMP 192.168.1.142 > 192.168.1.7 Echo request (type=8/code=0) ttl=64 id=53659 iplen=28 
SENT (0.7695s) ICMP 192.168.1.142 > 192.168.1.4 Echo request (type=8/code=0) ttl=64 id=53659 iplen=28 
SENT (1.0196s) ICMP 192.168.1.142 > 192.168.1.5 Echo request (type=8/code=0) ttl=64 id=53659 iplen=28 
SENT (1.2701s) ICMP 192.168.1.142 > 192.168.1.5 Echo request (type=8/code=0) ttl=64 id=53659 iplen=28 
RCVD (1.2707s) ICMP 192.168.1.5 > 192.168.1.142 Echo reply (type=0/code=0) ttl=64 id=34160 iplen=28 
SENT (1.5206s) ICMP 192.168.1.142 > 192.168.1.7 Echo request (type=8/code=0) ttl=64 id=53659 iplen=28 
SENT (1.7708s) ICMP 192.168.1.142 > 192.168.1.4 Echo request (type=8/code=0) ttl=64 id=53659 iplen=28 
SENT (2.0209s) ICMP 192.168.1.142 > 192.168.1.5 Echo request (type=8/code=0) ttl=64 id=53659 iplen=28 
SENT (2.2712s) ICMP 192.168.1.142 > 192.168.1.5 Echo request (type=8/code=0) ttl=64 id=53659 iplen=28 
RCVD (2.2717s) ICMP 192.168.1.5 > 192.168.1.142 Echo reply (type=0/code=0) ttl=64 id=34161 iplen=28 
SENT (2.5216s) ICMP 192.168.1.142 > 192.168.1.7 Echo request (type=8/code=0) ttl=64 id=53659 iplen=28 
SENT (2.7717s) ICMP 192.168.1.142 > 192.168.1.4 Echo request (type=8/code=0) ttl=64 id=53659 iplen=28 
SENT (3.0219s) ICMP 192.168.1.142 > 192.168.1.5 Echo request (type=8/code=0) ttl=64 id=53659 iplen=28 
SENT (3.2724s) ICMP 192.168.1.142 > 192.168.1.5 Echo request (type=8/code=0) ttl=64 id=53659 iplen=28 
RCVD (3.2730s) ICMP 192.168.1.5 > 192.168.1.142 Echo reply (type=0/code=0) ttl=64 id=34162 iplen=28 
SENT (3.5230s) ICMP 192.168.1.142 > 192.168.1.7 Echo request (type=8/code=0) ttl=64 id=53659 iplen=28 
^C 
Statistics for host 192.168.1.4:
 |  Probes Sent: 4 | Rcvd: 0 | Lost: 4  (100.00%)
 |_ Max rtt: N/A | Min rtt: N/A | Avg rtt: N/A
Statistics for host 192.168.1.5:
 |  Probes Sent: 4 | Rcvd: 3 | Lost: 1  (25.00%)
 |_ Max rtt: 0.391ms | Min rtt: 0.263ms | Avg rtt: 0.332ms
Statistics for host 192.168.1.6:
 |  Probes Sent: 4 | Rcvd: 0 | Lost: 4  (100.00%)
 |_ Max rtt: N/A | Min rtt: N/A | Avg rtt: N/A
Statistics for host 192.168.1.7:
 |  Probes Sent: 3 | Rcvd: 0 | Lost: 3  (100.00%)
 |_ Max rtt: N/A | Min rtt: N/A | Avg rtt: N/A
Raw packets sent: 15 (420B) | Rcvd: 3 (138B) | Lost: 12 (80.00%)
Tx time: 3.57078s | Tx bytes/s: 117.62 | Tx pkts/s: 4.20
Rx time: 3.57078s | Rx bytes/s: 38.65 | Rx pkts/s: 0.84
Nping done: 4 IP addresses pinged in 3.59 seconds

Answer 2

您可以通过以下方式在命令行中生成多个并行 nmap 进程：

nmap [options for destination 0] > output0 &

为每个目标生成许多此类 nmap 请求，同时保留 outputX 文件（output0、output1 等）的运行索引。当所有请求完成后，您可以检查每个输出文件的内容