zpool status 报告错误……接下来怎么办？

Question

在我们的 FreeNAS 服务器上，zpool status给我：

  pool: raid2
 state: ONLINE
status: One or more devices has experienced an unrecoverable error.  An
    attempt was made to correct the error.  Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
    using 'zpool clear' or replace the device with 'zpool replace'.
   see: http://www.sun.com/msg/ZFS-8000-9P
 scrub: none requested
config:

    NAME                                            STATE     READ WRITE CKSUM
    raid2                                           ONLINE       0     0     0
      raidz1                                        ONLINE       0     0     0
        gptid/5f3c0517-3ff2-11e2-9437-f46d049aaeca  ONLINE       0     0     0
        gptid/5fe33556-3ff2-11e2-9437-f46d049aaeca  ONLINE       3 1.13M     0
        gptid/60570005-3ff2-11e2-9437-f46d049aaeca  ONLINE       0     0     0
        gptid/60ebeaa5-3ff2-11e2-9437-f46d049aaeca  ONLINE       0     0     0
        gptid/61925b86-3ff2-11e2-9437-f46d049aaeca  ONLINE       0     0     0

errors: No known data errors

我该怎么办？scrub游泳池？

Answer 1

键入zpool clear raid2以清除错误并启动清理。

如果此后错误仍然存​​在，请更换磁盘。

有关硬件的更多详细信息会有所帮助，因此这是通用建议。我对连接到 PC 主板的大量消费磁盘的建议与我对企业级设备的建议不同。