Lei*_*igh 3 raid hard-drive hp hp-smart-array hp-proliant
我有一个 HP ProLiant DL380 G5，我有两个配置了 RAID 的逻辑驱动器。我有一个逻辑驱动器 RAID 1+0 和两个 72 GB 10k sas 1 端口备件号 376597-001。
我有一个硬盘出现故障并订购了更换。配置实用程序显示错误并且不会重建 RAID。我推测是硬盘故障并再次订购更换。与此同时，我将原始故障磁盘放回服务器中，并开始重建。当前显示 ok 状态但是在日志中我可以看到硬件错误。
新盘来了，我又遇到了同样的问题，不接硬盘。
我已经用最新的固件 7.24 更新了 P400 控制器，但仍然没有运气。
我能看到的唯一区别是原始驱动器具有固件 0103（与 RAID 驱动器相同），而新驱动器具有 HPD2。
任何意见，将不胜感激。
提前致谢
来自服务器的日志
ctrl 全部显示配置
插槽 1 中的 Smart Array P400（序列号：PAFGK0P9VWO0UQ）
array A (SAS, Unused Space: 0 MB)
logicaldrive 1 (68.5 GB, RAID 1, Interim Recovery Mode)
physicaldrive 2I:1:1 (port 2I:box 1:bay 1, SAS, 73.5 GB, OK)
physicaldrive 2I:1:2 (port 2I:box 1:bay 2, SAS, 72 GB, Failed
array B (SAS, Unused Space: 0 MB)
logicaldrive 2 (558.7 GB, RAID 5, OK)
physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SAS, 300 GB, OK)
physicaldrive 2I:1:3 (port 2I:box 1:bay 3, SAS, 300 GB, OK)
physicaldrive 2I:1:4 (port 2I:box 1:bay 4, SAS, 300 GB, OK)
ctrl all 显示配置细节
Smart Array P400 in Slot 1
Bus Interface: PCI
Slot: 1
Serial Number: PAFGK0P9VWO0UQ
Cache Serial Number: PA82C0J9VWL8I7
RAID 6 (ADG) Status: Disabled
Controller Status: OK
Hardware Revision: E
Firmware Version: 7.24
Rebuild Priority: Medium
Expand Priority: Medium
Surface Scan Delay: 15 secs
Surface Scan Mode: Idle
Wait for Cache Room: Disabled
Surface Analysis Inconsistency Notification: Disabled
Post Prompt Timeout: 0 secs
Cache Board Present: True
Cache Status: OK
Cache Status Details: A cache error was detected. Run
more information.
Cache Ratio: 100% Read / 0% Write
Drive Write Cache: Disabled
Total Cache Size: 256 MB
Total Cache Memory Available: 208 MB
No-Battery Write Cache: Disabled
Battery/Capacitor Count: 0
SATA NCQ Supported: True
Array: A
Interface Type: SAS
Unused Space: 0 MB
Status: Failed Physical Drive
Array Type: Data
One of the drives on this array have failed or has
Logical Drive: 1
Size: 68.5 GB
Fault Tolerance: RAID 1
Heads: 255
Sectors Per Track: 32
Cylinders: 17594
Strip Size: 128 KB
Full Stripe Size: 128 KB
Status: Interim Recovery Mode
Caching: Enabled
Unique Identifier: 600508B10010503956574F305551
Disk Name: \\.\PhysicalDrive0
Mount Points: C:\ 68.5 GB
Logical Drive Label: A0100539PAFGK0P9VWO0UQ0E93
Mirror Group 0:
physicaldrive 2I:1:2 (port 2I:box 1:bay 2, S
Mirror Group 1:
physicaldrive 2I:1:1 (port 2I:box 1:bay 1, S
Drive Type: Data
physicaldrive 2I:1:1
Port: 2I
Box: 1
Bay: 1
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 73.5 GB
Rotational Speed: 10000
Firmware Revision: 0103
Serial Number: B379P8C006RK
Model: HP DG072A9B7
PHY Count: 2
PHY Transfer Rate: Unknown, Unknown
physicaldrive 2I:1:2
Port: 2I
Box: 1
Bay: 2
Status: Failed
Drive Type: Data Drive
Interface Type: SAS
Size: 72 GB
Rotational Speed: 15000
Firmware Revision: HPD9
Serial Number: D5A1PCA04SL01244
Model: HP EH0072FARUA
PHY Count: 2
PHY Transfer Rate: Unknown, Unknown
Array: B
Interface Type: SAS
Unused Space: 0 MB
Status: OK
Array Type: Data
Logical Drive: 2
Size: 558.7 GB
Fault Tolerance: RAID 5
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 64 KB
Full Stripe Size: 128 KB
Status: OK
Caching: Enabled
Parity Initialization Status: Initialization Co
Unique Identifier: 600508B10010503956574F305551
Disk Name: \\.\PhysicalDrive1
Mount Points: E:\ 558.7 GB
Logical Drive Label: AF14FD12PAFGK0P9VWO0UQD007
Drive Type: Data
physicaldrive 1I:1:5
Port: 1I
Box: 1
Bay: 5
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 300 GB
Rotational Speed: 10000
Firmware Revision: HPD4
Serial Number: 3SE07QH300009923X1X3
Model: HP DG0300BALVP
Current Temperature (C): 32
Maximum Temperature (C): 45
PHY Count: 2
PHY Transfer Rate: Unknown, Unknown
physicaldrive 2I:1:3
Port: 2I
Box: 1
Bay: 3
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 300 GB
Rotational Speed: 10000
Firmware Revision: HPD4
Serial Number: 3SE0AHVH00009924P8F3
Model: HP DG0300BALVP
Current Temperature (C): 34
Maximum Temperature (C): 47
PHY Count: 2
PHY Transfer Rate: Unknown, Unknown
physicaldrive 2I:1:4
Port: 2I
Box: 1
Bay: 4
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 300 GB
Rotational Speed: 10000
Firmware Revision: HPD4
Serial Number: 3SE08NAK00009924KWD6
Model: HP DG0300BALVP
Current Temperature (C): 35
Maximum Temperature (C): 47
PHY Count: 2
PHY Transfer Rate: Unknown, Unknown
您可能有一个备用（替换）驱动器，其扇区大小略小于原始驱动器。
您使用什么操作系统？我们可以查看hpacucli输出以确定这一点。
一旦我们获得更多信息，我将更新此答案。
编辑：
请参阅我的回答：Smart Array P400i 物理驱动器在更换Windows 2008 的工具下载链接后发生故障...
我特别在寻找ctrl all show config.
编辑：
现在我已经看到了你的hpacucli输出，你处于一种非常罕见的情况。
logicaldrive 1 (68.5 GB, RAID 1, Interim Recovery Mode)
physicaldrive 2I:1:1 (port 2I:box 1:bay 1, SAS, 73.5 GB, OK)
physicaldrive 2I:1:2 (port 2I:box 1:bay 2, SAS, 72 GB, Failed
您原来的 72GB 驱动器实际上大于72GB。如您所见，您的健康磁盘是一个 73.5GB 的磁盘。惠普在产品生命周期内更换磁盘制造商，保持相同的备件编号。在这种情况下，发送给您的替换件是真正的 72GB 驱动器。重建肯定行不通。
唯一可以解决这个问题的是同等或更大尺寸的物理驱动器。如果您在保修期内，只需将此输出发送给 HP 并要求提供 146GB 磁盘。如果您不在保修期内，只需获取 146GB 磁盘，它就会重建为“68.5 GB”RAID-1 成员。
另外，要求 10k RPM 146GB 磁盘。你的旧 72GB 磁盘是 10k RPM（很久以前就停产了）。HP 替代品是 15k RPM 驱动器。
| 归档时间： |
|
| 查看次数： |
13681 次 |
| 最近记录： |