IBM ServeRAID M5015 如何从 Ubuntu 查看信息？

Question

我有一台 IBM x3620 M3 服务器

root@web26:~# lshw -short
/0/100/9/0 scsi4 storage LSI MegaSAS 9260
/0/100/9/0/2.0.0 /dev/sda disk 1990GB ServeRAID M5015

硬件RAID控制器。

如何查看 RAID 阵列状态、SMART 状态并从 Ubuntu 发出重建命令？

附注。

root@web26:~# modinfo mptctl
filename:       /lib/modules/2.6.32-28-server/kernel/drivers/message/fusion/mptctl.ko
version:        3.04.12
license:        GPL
description:    Fusion MPT misc device (ioctl) driver
author:         LSI Corporation
srcversion:     9052501D1B37F5BF2F73C49
depends:        mptbase
vermagic:       2.6.32-28-server SMP mod_unload modversions

Answer 1

您需要从 LSI安装MegaCLI 包。用户界面相当复杂；您最好在网上查找备忘单和摘要。

Answer 2

做到了，谢谢@justarobert。以下是未来的详细说明：

# cat /etc/issue

Ubuntu 10.04.2 LTS \n \l

安装两个包：

#apt-get install unzip rpm2cpio

解压一切

#unzip 8.00.46_Linux_MegaCLI.zip
#unzip -d MegaCliLin MegaCliLin.zip
#unzip -d 8.00.46_Linux_MegaCLI 8.00.46_Linux_MegaCLI.zip

解压 RPM（确保您在正确的目录中）

#rpm2cpio MegaCli-8.00.46-1.i386.rpm | cpio -idmv
#rpm2cpio Lib_Utils-1.00-08.noarch.rpm | cpio -idmv

（libsysfs.so.2.0.2 是必需的库，它来自 Lib_Utils-1.00-08.noarch.rpm 中的 LSI，apt-get install libsysfs 没有为我做）：

#cp opt/lsi/3rdpartylibs/x86_64/libsysfs.so.2.0.2 /usr/lib64/
#cp ./opt/MegaRAID/MegaCli/MegaCli64  /usr/local/sbin/
#ln -s /usr/local/sbin/MegaCli64 /usr/local/sbin/MegaCli

瞧，检查RAID！

#  MegaCli -LDInfo -Lall -aALL
Adapter 0 -- Virtual Drive Information:
Virtual Drive: 0 (Target Id: 0)
Name                :
RAID Level          : Primary-1, Secondary-0, RAID Level Qualifier-0
Size                : 1.809 TB
**State               : Optimal**
Strip Size          : 128 KB
Number Of Drives    : 2
Span Depth          : 1
Default Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU
Current Cache Policy: WriteThrough, ReadAheadNone, Direct, No Write Cache if Bad BBU
Access Policy       : Read/Write
Disk Cache Policy   : Disabled
Encryption Type     : None
Default Power Savings Policy: Controller Defined
Current Power Savings Policy: None
Can spin up in 1 minute: Yes
LD has drives that support T10 power conditions: No
LD's IO profile supports MAX power savings with cached writes: No