我正在启用 UEFI 的英特尔 NUC 计算机上安装 Ubuntu 16.04。我正在使用另一台计算机上的 SSD。在安装过程中,我选择了擦除磁盘并进行新的完整安装
在过程结束时,我看到:
grub-efi-amd64-signed failed installation /target/ Ubuntu 16.04
Run Code Online (Sandbox Code Playgroud)
并且系统无法启动。
我尝试使用引导修复,但显然它没有解决问题。
当我将文件从一个目录移动到另一个目录时,文件的时间戳会发生变化。例如,如果文件的创建日期为 2013-01-01,当我将其移动到不同的目录时,最终文件将具有移动日期,而不是创建日期。
如何解决这个问题?
从 Kubuntu 16.04 LTS 升级到 16.10 后,有线连接不起作用。有线连接显示在网络管理器中,但无法选择相关的“连接”按钮。Wi-Fi 连接工作正常。
奇怪的是,在同一台 PC 上使用 Kubuntu 16.10 live USB 可以立即识别以太网连接并正常工作。
这些是一些结果:
*-network
description: Wireless interface
product: Wireless 7260
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:02:00.0
logical name: wlan0
version: 73
serial: a0:a8:cd:cc:e2:7d
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=4.8.0-37-generic firmware=17.352738.0 ip=192.168.178.32 latency=0 link=yes multic
ast=yes wireless=IEEE 802.11
resources: irq:93 memory:d0700000-d0701fff
*-network DISABLED
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet …
Run Code Online (Sandbox Code Playgroud)