我有一台联想 IdeaPad Z510笔记本电脑。
当我打开“其他驱动程序”并搜索驱动程序时,我找不到其中列出的任何驱动程序。
这是因为我的笔记本电脑不需要任何额外的驱动程序,还是我需要从第三方软件源为我的笔记本电脑下载额外的驱动程序?
我刚刚将安全启动前、UEFI* 前的 Toshiba 2012 Satellite P755-S5390笔记本电脑从 15.10 更新到 16.04。在15.10中,无线适配器工作正常。现在,Ubuntu 拒绝承认我的笔记本电脑有无线接口。我已重新启动多次,执行以下操作:
apt install flashrom librtlsdr* nictools* r8168-dkms rtl-sdr rtl8812*
Run Code Online (Sandbox Code Playgroud)
这似乎很成功,而我在网上找到的许多其他东西都无济于事。Additional Drivers
的屏幕有Software and Updates
一个条目,它声称该条目是unknown
或not working correctly
。
Network Settings
是一个简短的条目(在左侧,曾经有一个“Wifi”设备左右):
(在你问之前,不,小加号没有帮助。)
我发现这篇文章中的用户遇到了类似的问题,并且他们发布了来自大量命令的大量数据,因此我将在这里执行相同的操作。
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 16.04 LTS
Release: 16.04
Codename: xenial
$ uname -a
Linux mint-kitty 4.2.0-36-generic #41-Ubuntu SMP
Mon Apr 18 15:49:10 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
$ lspci
00:00.0 …
Run Code Online (Sandbox Code Playgroud) 我一直在将 Ubuntu 引导到 3.13.0-93-generic,因为较新的版本不支持我的主板上内置的 RS880 [Radeon HD4250] 视频卡。
如果我要安装最新版本的 Ubuntu,我能否使用主板随附的华硕 CD 中的视频驱动程序?
如果您需要有关我遇到的问题的更多详细信息,请参阅问题“在 14.04 LTS 和 18 Bionic Beaver 中,监视器间歇性黑屏并随机闪烁”。我知道 Ubuntu 不支持我的旧显卡,因为 AMD 不同意再继续支持它五年,但是我的旧驱动程序可以与较新版本的 Ubuntu 一起使用吗?如果是这样,我该如何从我的 CD 安装驱动程序?(我知道一点,但永远不够。)谢谢!
我真的不想仅仅因为这台旧电脑而买一台新电脑。它仍然适用于旧软件,但 14.04 LTS 一直想升级,由于驱动程序问题,我无法升级。再次感谢!
/etc/modules includes
bbswitch load_state=0
Run Code Online (Sandbox Code Playgroud)
每次bbswitch
都没有加载,我必须手动:
sudo modprobe bbswitch
Run Code Online (Sandbox Code Playgroud)
然后运行bbswitch
命令切换显卡。
为什么不尊重load_state=0
?
我几乎是这个网站和 Ubuntu 18.04 的新手。今天我尝试在操作系统中使用我的新 Wacom Intuos Small(型号:CTL-4100)。将其连接到我的笔记本电脑后,它似乎工作得很好。问题是在注意到系统无法识别控制中心上的数位板后出现的。查找后,我按照 GitHub 页面上的说明安装了 input-wacom 驱动程序。然而,重新启动系统后,数位板完全停止工作。当我通过 USB 连接它时,它仍然显示 LED 灯,但它不会移动鼠标指针,并且按钮似乎也没有任何反应。我想知道是否有办法恢复 Wacom 数位板的默认系统驱动程序。
我必须补充一点,在内核驱动程序之后我还安装了 libwacom 和 xf86-input-wacom 驱动程序,但平板电脑似乎仍然无法工作。
我正在尝试在 Ubuntu 16.04 64x 上为使用 Python 3.6 的 conda 环境安装支持 GPU 的 Tensorflow。
我尝试安装所有GPU 要求,然后pip install --ignore-installed --upgrade https://storage.googleapis.com/tensorflow/linux/gpu/tensorflow_gpu-1.10.0-cp36-cp36m-linux_x86_64.whl
从我的 conda 环境中运行。
但是,当我打开 Python 终端并尝试时,import tensorflow as tf
我得到了一个ImportError: libcublas.so.9.0: cannot open shared object file: No such file or directory
.
这是要求的状态:
nvidia-smi
)release 7.5, V7.5.17
这是 的输出nvcc -v
)cat /usr/local/cuda/version.txt
)。我真的很困惑,因为我在其他地方读到 CUDA 版本和 nvcc 版本应该匹配。sudo dpkg -i /path/to/deb/file
然后是 …我已在桌面上安装了 Ubuntu 16.04 LTS,但未连接以太网。我的电脑使用英特尔以太网连接 I219-LM。在我看来,Ubuntu 没有安装建议的网络驱动程序。我找不到以太网驱动程序。
我想首先说我是 linux 新手(大约 2-3 周)。我购买了Maxesla Mini WiFi Adapter 1200M 802.11ac Dual Band 2.4/5GHz AC1200 Wireless Network Adapter usb dongle 并安装了针对当前内核驱动程序更新的rtl88x2bu 驱动程序(我遵循了 DKMS 安装)。
在笔记本电脑(或手机上的 wifi)上使用以太网电缆时,我获得了 450-500mbps 的完整速度,但使用此加密狗时大约为 200 mbps。我正在使用 Kubuntu 18.4 LTS 并且启用了内置 wifi (2.4g),因为我不知道如何禁用它(不知道这是否有区别)。
先感谢您!
sudo lshw -class 网络
*-network
description: Wireless interface
product: QCA9565 / AR9565 Wireless Network Adapter
vendor: Qualcomm Atheros
physical id: 0
bus info: pci@0000:01:00.0
logical name: wlp1s0
version: 01
serial: 18:cf:5e:35:79:cb
width: 64 bits
clock: 33MHz
capabilities: …
Run Code Online (Sandbox Code Playgroud) 我最近从 Windows 迁移到 Ubuntu 18.04。
虽然我在 Windows 中能够获得高达 2 Mbps 的下载速度,但在 Ubuntu 上我什至很难达到 110 Kbps。
我将手机放在计算机旁边,通过同一网络将互联网连接到我的计算机,并且我获得了相同的 2 Mbps 带宽。
关于如何解决这个问题有什么建议吗?这是lshw -C network的输出:
*-network
description: Wireless interface
product: Wireless-AC 9560 [Jefferson Peak]
vendor: Intel Corporation
physical id: 14.3
bus info: pci@0000:00:14.3
logical name: wlo1
version: 10
serial: 18:1d:ea:d5:d8:79
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=5.0.0-23-generic firmware=43.95eb4e97.0 ip=[redacted] latency=0 link=yes multicast=yes wireless=IEEE 802.11
resources: irq:16 memory:8451c000-8451ffff
Run Code Online (Sandbox Code Playgroud) 我的扩展坞需要一些适用于 Ubuntu 的特殊驱动程序。我也可以在 Kubuntu 上安装它们吗?还是需要移植驱动程序?
(我特别想安装这些驱动程序: https: //www.displaylink.com/downloads/ubuntu)