Ubuntu 14.04 上的 Netgear A6100

Question

我正在尝试在装有 Ubuntu 14.04 的 Sony Vaio 笔记本电脑上使用 Netgear A6100 无线 USB WIFI 适配器。安装 Ubuntu 后，预装的无线网卡丢失了来自 wifi 路由器的信号条，所以我买了这个 USB 无线适配器来解决我的连接问题。

这是输出lsusb：

Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 5986:02d3 Acer, Inc 
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 3938:1032  
Bus 003 Device 002: ID 0846:9052 NetGear, Inc. 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

这是输出sudo lshw -c network：

*-network               
   description: Wireless interface
   product: AR9485 Wireless Network Adapter
   vendor: Qualcomm Atheros
   physical id: 0
   bus info: pci@0000:01:00.0
   logical name: wlan0
   version: 01
   serial: 08:ed:b9:b8:88:cb
   width: 64 bits
   clock: 33MHz
   capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless
   configuration: broadcast=yes driver=ath9k driverversion=3.16.0-46-generic firmware=N/A ip=192.168.1.11 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn
   resources: irq:16 memory:c0600000-c067ffff memory:c0680000-c068ffff
*-network
   description: Ethernet interface
   product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
   vendor: Realtek Semiconductor Co., Ltd.
   physical id: 0
   bus info: pci@0000:03:00.0
   logical name: eth0
   version: 07
   serial: 30:f9:ed:af:9f:a4
   size: 10Mbit/s
   capacity: 1Gbit/s
   width: 64 bits
   clock: 33MHz
   capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
   configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s
   resources: irq:43 ioport:2000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff
*-network
   description: Wireless interface
   physical id: 1
   bus info: usb@3:2
   logical name: wlan1
   serial: 6c:b0:ce:22:ed:3a
   capabilities: ethernet physical wireless
   configuration: broadcast=yes driver=rtl8812au driverversion=3.16.0-46-generic firmware=N/A link=no multicast=yes wireless=unassociated

Answer 1

您的设备使用罕见且难以捉摸的驱动程序 8812au。请获取临时有线以太网或类似连接，打开终端并执行以下操作：

sudo apt-get update
sudo apt-get install linux-headers-generic build-essential git
git clone https://github.com/abperiasamy/rtl8812AU_8821AU_linux.git
cd ~/rtl8812AU_8821AU_linux
make
sudo make install
sudo modprobe 8812au

您的无线现在应该可以工作了。

当 Update Manager 安装更高版本的 linux-image 时，重新编译：

cd rtl8812AU_8821AU_linux/
make clean
make
sudo make install
sudo modprobe 8812au

请保留该文件和这些说明以备不时之需。

我们可能需要将内部驱动程序列入黑名单以防止干扰。请从命令中告诉我它的驱动程序：

 sudo lshw -C network

然后我将编辑此答案以提供说明。