Ubuntu 在几秒钟的睡眠后醒来

Question

我有一个严重的问题，使我的计算机在没有任何键盘或鼠标点击的情况下自动唤醒，它在睡眠模式下停留约 8 秒。

编辑：它随机发生，有时它只是无法唤醒并正常工作，我找不到重现它的恒定方法。

这有可能解决吗？如果不是，那么当我关闭盖子时如何让我的笔记本电脑休眠？

如果有帮助，我正在使用带有额外的 Broadcom 无线和 nvidia 驱动程序的 hp pavilion dv6 笔记本电脑。

---

编辑：

这是关于我的 /proc/acpi/wakeup 的一些信息；

nx1337@nx-HP-Pavilion-dv6-Notebook-PC:~$ cat /proc/acpi/wakeup
Device  S-state   Status   Sysfs node
P0P2      S4    *disabled
PEGP      S4    *disabled
P0P3      S4    *disabled  pci:0000:00:01.0
PEGP      S4    *disabled
P0P1      S4    *disabled  pci:0000:00:1e.0
CIR0      S5    *enabled   pnp:00:00
PS2K      S3    *enabled   pnp:00:07
PS2M      S3    *disabled  pnp:00:08
EHC1      S3    *enabled   pci:0000:00:1d.0
USB1      S3    *disabled
USB2      S3    *disabled
USB3      S3    *disabled
USB4      S3    *disabled
EHC2      S3    *enabled   pci:0000:00:1a.0
USB5      S3    *disabled
USB6      S3    *disabled
USB7      S3    *disabled
HDEF      S0    *disabled  pci:0000:00:1b.0
RP01      S4    *disabled  pci:0000:00:1c.0
RP02      S4    *disabled  pci:0000:00:1c.1
PXSX      S5    *enabled   pci:0000:03:00.0
RP03      S4    *disabled
RP04      S4    *disabled
RP05      S4    *disabled  pci:0000:00:1c.4
RP08      S4    *disabled  pci:0000:00:1c.7

恐怕我什至没有 PBTN 条目，所以我不想弄乱我的系统，胡乱猜测并禁用我不知道的东西 - 如果其中一个指的是我的电源按钮怎么办？

这是我的 var/log/syslog 中的一些相关信息；

Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8587.383024] PM: Syncing filesystems ... done.
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8587.452554] PM: Preparing system for mem sleep
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8587.452826] Freezing user space processes ... (elapsed 0.002 seconds) done.
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8587.454994] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8587.456292] PM: Entering mem sleep
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8587.456339] Suspending console(s) (use no_console_suspend to debug)
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8587.456695] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8587.456746] sd 0:0:0:0: [sda] Stopping disk
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8587.553531] i8042 aux 00:08: System wakeup disabled by ACPI
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8587.553549] i8042 kbd 00:07: System wakeup enabled by ACPI
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8587.553575] ene_ir 00:00: System wakeup enabled by ACPI
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.049478] PM: suspend of devices complete after 593.170 msecs
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.049702] PM: late suspend of devices complete after 0.220 msecs
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.050173] r8169 0000:03:00.0: System wakeup enabled by ACPI
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.081795] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.097841] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.113370] PM: noirq suspend of devices complete after 63.685 msecs
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.113512] ACPI: Preparing to enter system sleep state S3
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.117408] PM: Saving platform NVS memory
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.117809] Disabling non-boot CPUs ...
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.221247] smpboot: CPU 1 is now offline
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.325216] smpboot: CPU 2 is now offline
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.325895] Broke affinity for irq 21
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.325908] Broke affinity for irq 42
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.580520] smpboot: CPU 3 is now offline
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.581674] ACPI: Low-level resume complete
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.581741] PM: Restoring platform NVS memory
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.582259] Enabling non-boot CPUs ...
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.582310] x86: Booting SMP configuration:
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.582311] smpboot: Booting Node 0 Processor 1 APIC 0x1
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.595760] CPU1 is up
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.595785] smpboot: Booting Node 0 Processor 2 APIC 0x4
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.609304] CPU2 is up
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.609328] smpboot: Booting Node 0 Processor 3 APIC 0x5
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.622906] CPU3 is up
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.625304] ACPI: Waking up from system sleep state S3
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.646462] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.678443] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.790598] PM: noirq resume of devices complete after 157.634 msecs
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.790762] PM: early resume of devices complete after 0.124 msecs
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.790996] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.794640] r8169 0000:03:00.0: System wakeup disabled by ACPI
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.839338] ene_ir 00:00: System wakeup disabled by ACPI
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8588.839627] i8042 kbd 00:07: System wakeup disabled by ACPI
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8589.006396] usb 2-1.5: reset high-speed USB device number 3 using ehci-pci
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8589.122299] ata6: SATA link down (SStatus 0 SControl 300)
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8589.122359] ata5: SATA link down (SStatus 0 SControl 300)
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8589.130310] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8589.192118] ata2.00: configured for UDMA/100
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8589.350171] firewire_core 0000:04:00.0: rediscovered device fw0
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8591.473567] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8591.479306] ata1.00: configured for UDMA/100
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8591.493692] sd 0:0:0:0: [sda] Starting disk
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8591.510980] ERROR @wl_wowl_ind_wake_reason : Unable to get wake reason, err = -95
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8591.514192] PM: resume of devices complete after 2724.270 msecs
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8591.514478] PM: Finishing wakeup.
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8591.514752] firewire_ohci 0000:04:00.0: no hotplug settings from platform
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8591.514779] sdhci-pci 0000:04:00.1: no hotplug settings from platform
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8591.514803] pci 0000:04:00.2: no hotplug settings from platform
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8591.514827] jmb38x_ms 0000:04:00.3: no hotplug settings from platform
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8591.514851] pci 0000:04:00.4: no hotplug settings from platform
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8591.514960] r8169 0000:03:00.0: no hotplug settings from platform
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8591.515128] firewire_ohci 0000:04:00.0: no hotplug settings from platform
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8591.515153] sdhci-pci 0000:04:00.1: no hotplug settings from platform
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8591.515177] pci 0000:04:00.2: no hotplug settings from platform
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8591.515215] jmb38x_ms 0000:04:00.3: no hotplug settings from platform
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8591.515240] pci 0000:04:00.4: no hotplug settings from platform
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8591.514480] Restarting tasks ... done.
Mar 18 23:42:27 nx-HP-Pavilion-dv6-Notebook-PC kernel: [ 8591.598871] video LNXVIDEO:02: Restoring backlight state

Answer 1

我有一个非常相似的问题；我将向您展示一个示例，但您需要使其适应您的计算机。这里的输出来自我的桌面（并修剪了），所以应用cum grano salis。

检查 PC 的唤醒事件：

2& [romano:~/etc] % cat /proc/acpi/wakeup 
Device  S-state   Status   Sysfs node
PCI0      S4    *disabled  no-bus:pci0000:00
COM1      S4    *disabled  pnp:00:06
PEGH      S4    *disabled
PEGL      S4    *disabled
IGBE      S4    *enabled   pci:0000:00:19.0
PCX1      S4    *disabled  pci:0000:00:1c.0
PCX5      S4    *disabled  pci:0000:00:1c.4
PCX7      S4    *disabled  pci:0000:00:1c.6
HUB       S4    *disabled  pci:0000:00:1e.0
EUS1      S3    *enabled   pci:0000:00:1d.0
EUS2      S3    *enabled   pci:0000:00:1a.0
PBTN      S4    *enabled

该enabled事件是可以唤醒您的计算机之一。其中之一是在您的情况下启动；你必须找出哪一个。

例如，您可以使用以下命令切换唤醒状态EUS1（无论这意味着什么 --- 不知道）：

echo EUS1 | sudo tee /proc/acpi/wakeup

然后你可以通过重复第一个命令来检查唤醒是否被禁用。现在您可以尝试挂起并查看 PC 是否保持挂起。重复。

不要在PBTN--- 它是电源按钮上禁用事件。在这种情况下，您可能无法恢复！

我的策略通常是禁用除PBTN--- 之外的所有内容，现在只能通过电源按钮触发恢复。然后您可以尝试重新启用其他来源（或不启用）。

找到罪魁祸首事件后，您可以将它们添加到您的事件中/etc/rc.local以使更改永久化。但是请注意，界面真的很糟糕，您只能切换启用/禁用状态，而不能设置它；因此，例如要根据其状态独立禁用 EUS1，您应该使用

grep 'EUS1.*enabled' < /proc/acpi/wakeup >/dev/null && echo "EUS1" > /proc/acpi/wakeup

在您的/etc/rc.local.

在我的情况下，EHC y XHC 设备的罪魁祸首，可能是因为我有一个 USB 键盘（虽然不确定），这是我的摘录rc.local：

for device in XHC EHC1 EHC2; do
    grep $device /proc/acpi/wakeup | grep enabled > /dev/null && {
        echo Disabling wakeup on $device 
        echo $device > /proc/acpi/wakeup
    }
done