Ubuntu 14.04 两个 Nvidia 卡三屏 Xinerama，带有专有驱动程序，第三个屏幕黑色和 X 光标

Question

Ubuntu 14.04 两个 Nvidia 卡三屏 Xinerama，带有专有驱动程序，第三个屏幕黑色和 X 光标

Hor*_*rse 7 nvidia xorg multiple-monitors xinerama 14.04

我在让我的第三个屏幕正常工作时遇到了一些问题。

我的三屏在 12.04 上运行良好，使用 2 个 nvidia 卡。进行了 14.04 的全新安装，并且没有任何问题可以使其正常工作。

它要么被禁用，要么屏幕变黑，光标为 X。我只能从 nvidia 服务器设置工具中启用它。Ubuntu 本机显示设置甚至不会显示第三个屏幕。

我尝试从我的旧安装中复制 xorg.conf，它在重新启动 X 后在登录屏幕上运行良好，但在我登录后它就坐在那里并且没有做任何事情（鼠标仍在工作）。

如果这有什么不同，我将使用 gnome-session-fallback 而不是 unity。如果我尝试统一，仍然会遇到这些问题。

如何让我的第三个屏幕工作并显示桌面？

这是我当前的 xorg.conf

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 331.20  (buildd@roseapple)  Mon Feb  3 15:07:22 UTC 2014


Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" RightOf "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "DELL 1907FP"
    HorizSync       30.0 - 81.0
    VertRefresh     56.0 - 76.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: unknown, VertRefresh source: unknown
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "DELL 1907FP"
    HorizSync       0.0 - 0.0
    VertRefresh     0.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor2"
    VendorName     "Unknown"
    ModelName      "DELL 1907FP"
    HorizSync       30.0 - 81.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 580"
    BusID          "PCI:1:0:0"
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GT 520"
    BusID          "PCI:3:0:0"
EndSection

Section "Device"
    Identifier     "Device2"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GT 520"
    BusID          "PCI:3:0:0"
EndSection

Section "Screen"

# Removed Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0, DVI-I-3: nvidia-auto-select +1280+0"
# Removed Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0"
# Removed Option "SLI" "Off"
# Removed Option "BaseMosaic" "off"
# Removed Option "metamodes" "GPU-109d4eb8-b40b-87d7-3fd6-95830d1d5215.DVI-I-2: nvidia-auto-select +0+0, GPU-109d4eb8-b40b-87d7-3fd6-95830d1d5215.DVI-I-3: nvidia-auto-select +1280+0, GPU-82e96214-175e-5e6a-218c-5bdbc948daf2.DVI-I-1: nvidia-auto-select +3200+0"
# Removed Option "SLI" "off"
# Removed Option "BaseMosaic" "on"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "DFP-0"
    Option         "metamodes" "DVI-I-2: nvidia-auto-select +0+0, DVI-I-3: nvidia-auto-select +1280+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"

# Removed Option "metamodes" "nvidia-auto-select +0+0"
# Removed Option "metamodes" "DVI-I-3: nvidia-auto-select +0+0"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen2"
    Device         "Device2"
    Monitor        "Monitor2"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Run Code Online (Sandbox Code Playgroud)

这是我旧的“在 12.04 中工作”xorg.conf

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 310.19  (buildmeister@swio-display-x86-rhel47-08.nvidia.com)  Thu Nov  8 02:08:55 PST 2012


Section "ServerLayout"

# Removed Option "Xinerama" "0"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" RightOf "Screen2"
    Screen      2  "Screen2" RightOf "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "1"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"

    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "DELL 1907FP"
    HorizSync       30.0 - 81.0
    VertRefresh     56.0 - 76.0
    Option         "DPMS"
EndSection

Section "Monitor"

    # HorizSync source: unknown, VertRefresh source: unknown
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "DELL 1907FP"
    HorizSync       30.0 - 81.0
    VertRefresh     56.0 - 76.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor2"
    VendorName     "Unknown"
    ModelName      "Apple Cinema HD"
    HorizSync       74.0 - 74.6
    VertRefresh     59.9 - 60.0
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 580"
    BusID          "PCI:1:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GT 520"
    BusID          "PCI:3:0:0"
EndSection

Section "Device"
    Identifier     "Device2"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 580"
    BusID          "PCI:1:0:0"
    Screen          1
EndSection

Section "Screen"

# Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-2: nvidia-auto-select +1280+0"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1280x1024_75 +0+0; DFP-0: 1152x864 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select +0+0 {viewportout=1280x720+0+152}"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen2"
    Device         "Device2"
    Monitor        "Monitor2"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "metamodes" "DFP-2: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "Disable"
EndSection

Run Code Online (Sandbox Code Playgroud)

删除 xorg.conf 并重新启动后 xrandr 的输出

Screen 0: minimum 8 x 8, current 3200 x 1200, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
DVI-I-2 connected primary 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm
   1280x1024      60.0*+   75.0  
   1152x864       75.0  
   1024x768       75.0     60.0  
   800x600        75.0     60.3  
   640x480        75.0     59.9  
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-I-3 connected 1920x1200+1280+0 (normal left inverted right x axis y axis) 495mm x 310mm
   1920x1200      60.0*+   59.9

Run Code Online (Sandbox Code Playgroud)

Answer 1

小智 0

我有相同的配置，有 3 个显示器。一台机器有2个显卡和3个显示器。另外 1 个图形和 3 个显示器。

在两台机器上，我必须将每个监视器配置为拥有自己的 xserver。

要配置它，我启动 NVidia X 服务器设置 (nvidia-settings) 转到 X 服务器显示配置。在“配置：”下拉框中为每个监视器添加一个 xserver。还要启用 Xinerama 复选框。根据需要组织显示器。

单击保存到 X 配置并保存在文件 /etc/X11/xorg.conf 中。

现在您必须重新启动或重新启动显示管理器。

有时（不是经常）我确实在重置配置时遇到问题，但随后再次执行上述操作。

通过此配置，一些标准显示配置工具（例如选择屏幕保护程序等）将可用。

希望这可以帮助...

归档时间：	11 年，4 月前
查看次数：	8552 次
最近记录：	11 年，4 月前