Fuji AV-150 相机在 Ubuntu 14.04 上不能像在 13.10 上一样工作

Question

我正在使用 ubuntu 14.04 LTS（64 位）。我可以在 13.10 中通过 nautilus 访问我的 fujifilm AV-150 数码相机的 4GB 内存，但在 14.04 中不再显示！

lsusb

Bus 002 Device 003: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 011: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E230/E270/E870 HSDPA/HSUPA Modem
Bus 001 Device 012: ID 04cb:021b Fuji Photo Film Co., Ltd 
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

lsblk

prasad@Trusty-ubuntu:~$ lsblk
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 931.5G  0 disk 
??sda1   8:1    0   100M  0 part 
??sda2   8:2    0  99.9G  0 part 
??sda3   8:3    0     1K  0 part 
??sda4   8:4    0  30.2G  0 part 
??sda5   8:5    0   100G  0 part /mnt/Linux
??sda6   8:6    0   200G  0 part /mnt/Media
??sda7   8:7    0   300G  0 part 
??sda8   8:8    0 201.3G  0 part /media/prasad/Home
sdb      8:16   0 465.8G  0 disk 
??sdb1   8:17   0   300M  0 part 
??sdb2   8:18   0   100M  0 part 
??sdb3   8:19   0   128M  0 part 
??sdb4   8:20   0  39.5G  0 part 
??sdb5   8:21   0   250G  0 part 
??sdb6   8:22   0     4G  0 part [SWAP]
??sdb7   8:23   0    10G  0 part 
??sdb8   8:24   0    28G  0 part 
??sdb9   8:25   0  28.6G  0 part /
sr0     11:0    1  32.8M  0 rom

消息

检测到摄像机但未安装为大容量存储器。在 ubuntu 13.10 中，它会自动检测并安装，没有任何麻烦。

Answer 1

这是一个错误

执行以下命令后将检测到相机

选项一

echo 'ACTION="add", ENV{ID_USB_INTERFACES}=="*:060101:*", ENV{ID_GPHOTO2}="1", ENV{GPHOTO2_DRIVER}="PTP", MODE="0664", GROUP="plugdev"' | sudo tee /lib/udev/rules.d/40-libgphoto2-6.rules

然后拔下/重新插入相机。

选项二

sudo -H gedit /lib/udev/rules.d/40-libgphoto2-6.rules

并使文件看起来像这样：

ACTION!="add", GOTO="libgphoto2_rules_end"
SUBSYSTEM!="usb", GOTO="libgphoto2_usb_end"
ENV{ID_USB_INTERFACES}=="", IMPORT{builtin}="usb_id"
ENV{ID_USB_INTERFACES}=="*:060101:*", ENV{ID_GPHOTO2}="1", ENV{GPHOTO2_DRIVER}="PTP", MODE="0664", GROUP="plugdev"

LABEL="libgphoto2_rules_end"

感谢马丁·皮特